6 • Assembling the Blades

Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan).

6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades.

6-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. This is normal.

6-3. Remove the blade mounting screws and rubber shipping bumpers from the motor. Note: Some blade mounting screws are installed in the motor to secure shipping blocks.

6-4. For each blade, insert one blade mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both mounting screws.

 

 

Blade Assembly

Use with grommet

 

Screws

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use without grommet

Step 6-1 (Detail)

Grommet

Steps 6-16-2

Blade

Mounting

Screw

Step 6-4



41910-01 • 04/27/07 • Hunter Fan Company

Page 9
Image 9
Hunter Fan TypeT warranty Assembling the Blades