Husky HSK141HD owner manual Charging

•Built-in hanging lanyard for hands-free convenience

•Cordless operation allows complete freedom of movement, corded for longer run time

•Pistol-grip handle fits comfortably in your hand

•Locking Trigger ON/OFF Switch delivers an instant beam, locks for continuous beam

•Unique switch-locking mechanism prevents accidental battery rundown

•May be charged from either AC or DC Power Sources (both charging adapters included)

BUILD-IN

WORKSTAND

FIGURE 1

BATTERY STATUS

PANEL

SLIDING TRIGGER

LOCK

TRIGGER SWITCH	AREA UTILITY
	LIGHT SWITCH
	AREA LIGHT

2.CHARGING:

FIGURE 2

CHARGING PORT

NOTE: During charging, use the handy, built-in stand (See Figure 3) to provide a steady base for the spotlight on floor, shelf, workbench, or vehicle floor.

Charging with AC 110/120 Volt AC charger - Plug the AC charger (included) into the charging port on the back of the HUSKY spotlight 2.25 body, and then plug into a standard AC wall outlet. Make sure the electric rating of your AC Power Supply matches the requirements listed on top of the AC CHARGER (110V AC). Make sure the Trigger Switch is in the OFF position. For initial charge, allow 20 hours for completion of a full charging cycle. For subse- quent charges, allow approximately 8-10 hours. Charge until the green Battery Status Panel LED is lit.

NOTE: Charging from a 110/120 Volt AC power source is the most efficient method and is especially recommended for first-time charging.

Charging/Powering with 12 VOLT DC Charger - Plug the DC fused Recharge/Power Adapter (included) into the barrel receptacle on the back of the spotlight body, and then insert the cigarette lighter plug into the cigarette lighter socket of your vehicle or other 12 VDC power source. Make sure the Locking Trigger Switch is in the OFF position. Allow approximately 3–5 hours charging time if the engine is running. You may use the spotlight while its internal battery is recharging. When the spotlight is OFF charge until the green battery status panel LED is lit. NOTE: Be sure to use only the adapter cords supplied by the manufacturer for recharging - The use of unauthorized adapter cords may damage the unit and will void the warranty.

3