Husky HSK141HD owner manual Specifications, Battery Disposal, Fuse Replacement

FIGURE 5	POSITIVE BATTERY
	TERMINAL
	BATTERY
	NEGATIVE
	BATTERY
	TERMINAL
BATTERY
HOLD DOWN
STRAPS (2)
	HOLD DOWN SCREWS (4)

BATTERY DISPOSAL:

1.Non-spillable sealed lead-acid Battery - This battery is fully recyclable and should be accepted at any location that accepts common automotive starter batteries. Examples of places that accept these batteries are: County or municipal recycling drop-off centers, scrap metal dealers, and retailers who sell automotive replacement lead acid starter batteries. For more information on recycling this battery, call toll-free (877) 288-7722.

2.Before disposing of the battery, protect exposed terminals with heavy-duty tape to prevent shorting (Shorting can result in injury or fire).

3.Do not expose battery to fire or intense heat as it may explode.

FUSE REPLACEMENT: RECYCLE

The plug of the DC Power/Charging adapter is equipped with a 10 amp cartridge fuse. If this fuse blows, there may be a short circuit in the power cord or lamp assembly. The fuse will blow if the battery is connected with reverse polarity. The fuse is accessed by unscrew- ing (counter-clockwise) the tip of the large DC plug. Check the fuse with an ohmmeter or other continuity checker. If the fuse is open, investigate why it blew and correct the problem before replacing the fuse. Reassemble the DC plug and power the lamp from a 8 Amp or greater 12 volt power supply.

SPECIFICATIONS

Spotlight Bulb	.................................................................................. 12 volt, H3 series
Battery	Maintenance free, sealed lead acid, 12 volt, 3 Amp Hour
Weight	6 lbs 2 oz (1.5 kg)
Depth	9.0 in (22.9 cm)
Width	6.5 in (16.51 cm)
Height	11.5 in. (29.21 cm)

7