Madrigal Imaging N33, power amplifier manual Specifications, Madrigal Audio Laboratories, Inc

Specifications

The correlation between published specifications and performance is unreliable. A list of numbers reveals virtually nothing. All technical measurements must be sub- ject to qualitative as well as quantitative interpretation. Measurements of the Mark Levinson Nº33 yield excellent results by any standards. However, only those speci- fications that apply to its actual operation are included here. All specifications are subject to change at any time, in order to improve the product.

■Rated power output:300 w/ch continuous rms power @ 8Ω 600 w/ch continuous rms power @ 4Ω

1200 w/ch continuous rms power @ 2Ω

2400 w/ch continuous rms power @ 1Ω

	all of the above power ratings measured from
	20 Hz–20 kHz with no more than 0.3% THD
■	Frequency response:	within 0.1 dB from 20 Hz to 20 kHz
■	Signal to Noise ratio (main outputs):	better than –80 dB (ref. 1 w)
■	Input impedance:	100kΩ (balanced)
		50kΩ (single-ended)
■	Voltage gain:	26.8 dB
■	Input sensitivity:	2.3 V for full rated output
■	Power consumption:	typically 840 W (± 5%) at idle
		typically 210 W (± 5%) in standby

■Mains voltage:determined by the needs of country for which the unit was manufactured; cannot be reset by dealer or user

■	Overall dimensions:	See “Dimensions”
■	Shipping weight:	435 lbs. (198 kg) each

■Connector complement: four custom binding posts per channel one 3-pin XLR balanced input connector per channel two RCA input connectors per channel two 1⁄8" mini-jacks for remote turn-on

two Mark Levinson communications ports (RJ-11) one captive high current AC mains cord

■ Output impedance: less than 0.05Ω from 20–20,000 Hz

For more information, see your Mark Levinson dealer, or contact:

Madrigal Audio Laboratories, Inc.

P.O. Box 781

2081 South Main Street (Route 17)

Middletown, Connecticut 06457 USA

Telephone	(860)	346-0896
FAX	(860)	346-1540

25