Emptying the Drum
!WARNING: To reduce the risk of injury from accidental starting, unplug power cord before emptying the drum.
Unlatch
Power Head
Assembly
1.Place vac squarely on a stable surface, such as ground, floor, bench, etc.
2.Remove the power head assembly of the wet/dry vac by pulling outward on the latches located on each side of the vac. Lift off the power head assembly.
3.Dump the drum contents into the proper waste disposal container.
Blowing Feature
Your vac contains a blowing feature. It has the capability to blow sawdust and other debris. It is excellent to use to blow dust and debris out of garages or off patios and driveways. Follow the steps below to use your vac as a blower.
1.Locate blowing port of your vac.
2.Insert one end of the 4 foot x
4.Turn vac “ON”and you are ready to use your vac as a blower.
!WARNING: Always wear safety eyewear complying with ANSI Z87.1 (or in Canada CSA Z94.3) when using as a blower.
!WARNING: To avoid injury to bystanders, keep them clear of blowing debris.
!CAUTION: Wear a dust mask if blowing creates dust which might be inhaled.
!CAUTION: To reduce the risk of hearing damage, wear ear protectors when using the vac/blower for extended hours or when using it in a noisy area.
9