Manuals / Husqvarna / Lawn and Garden / Chainsaw

Husqvarna 1153176-26 manual What is WHAT?, What is what on the chain saw?

Models: 1153176-26

1 44

Download 44 pages 12.28 Kb

Page 5

Image 5

WHAT IS WHAT?

What is what on the chain saw?

1	Cylinder cover	16	Spike bumper
2	Front handle	17	Chain catcher
3	Chain brake and front hand guard	18	Clutch cover
4	Starter	19	Rear handle with right hand guard
5	Chain oil tank	20	Throttle control
6	Starter handle	21	Throttle lockout
7	Adjuster screws carburettor	22	Decompression valve
8	Choke control/Start throttle lock	23	Combination spanner
9	Rear handle	24	Chain tensioning screw
10	Stop switch (Ignition on/off switch.)	25	Operator′s manual
11	Fuel tank	26	Bar guard
12	Mufﬂer	27	Switch for heated handle (385XPG, 390XPG)
13	Bar tip sprocket	28	Oil pump adjustment screw
14	Chain	29	Information and warning decal
15	Bar	30	Product and serial number plate

English – 5

Page 5

Image 5

Husqvarna 1153176-26 manual What is WHAT?, What is what on the chain saw?

Contents

385XP 385XPG 390XP 390XPG Symbols in the operator’s manual KEY to SymbolsSymbols on the machine Contents Dear Customer IntroductionWhat is what on the chain saw? What is WHAT?Always use common sense General Safety PrecautionsBefore using a new chain saw Chain brake and front hand guard Machine′s safety equipmentPersonal protective equipment General Safety Precautions Chain catcher Throttle lockoutRight hand guard Vibration damping systemCutting equipment Stop switchMufﬂer General rulesBar Cutting equipment designed to reduce kickbackChain Injuries Some terms that describe the bar and chainGeneral information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingLubricating cutting equipment Tensioning the chainChecking chain lubrication Filling with chain oilChain drive sprocket Needle bearing lubricationChecking wear on cutting equipment Fitting the bar and chain AssemblyFitting a spike bumper Working with the chainFuel Fuel HandlingFuelling Fuel safetyTransport and storage Long-term storageStarting and stopping Starting and StoppingCold engine Warm engineStopping Working Techniques Basic safety rulesBefore use General working instructionsJam. Always stop the engine before cleaning Terms Basic cutting techniqueLimbing Tree felling techniqueSafe distance Felling directionDirectional cuts Clearing the trunk and preparing your retreatFreeing a trapped tree Freeing a tree that has fallen badlyFelling cut What is kickback? How to avoid kickbackGeneral advice Cutting trees and branches that are in tensionCutting the trunk into logs General MaintenanceCarburettor adjustment Carburettor without movement limiters Recommended engine speeds are as follows Checking brake band wear When the bar hits the stump the brake should be appliedChecking the front hand guard Checking the inertia brake releaseImmediately Checking the brake triggerMufﬂer Changing a broken or worn starter cord StarterTensioning the recoil spring Changing a broken recoil springSpark plug Air ﬁlterFitting the starter Must always be replacedLubricating the bar tip sprocket Adjustment of the oil pumpNeedle bearing lubrication Cooling systemTemperature 0C or colder Air Injection centrifugal cleaningWinter use Heated handlesDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain ﬁling and ﬁle gauges Bar and chain combinationsApplies to Europe only EC-declaration of conformityPage Original instructions 1153176-26