Husqvarna 1153191-26 manual Starting, Fuel safety, Transport and storage, Adjusting the harness

SAFETY INSTRUCTIONS

Starting

•Never start the machine indoors. Exhaust fumes can be dangerous if inhaled.

•Observe the surroundings and ensure that no people or animals can come into contact with the blower.

•Place the machine on the ground, press the machine body against the ground with your left hand (NOTE! Not your foot). Now grasp the starter handle with your right hand and then pull quickly and firmly.

Fuel safety

•Always use a fuel container with an anti-spill valve.

•Never refuel the machine while the engine is running. Always stop the engine and let it cool for a few minutes before refuelling.

•Make sure there is plenty of ventilation when refuelling or mixing fuel (petrol and 2-stroke oil).

•Avoid all skin contact with fuel. Fuel is a skin irritant and may even cause skin changes.

•Move the machine at least 3 m from the refuelling point before starting it.

•Never start the machine:

-If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

-If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

-If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

Transport and storage

•Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact

with sparks or naked flames, for example, from electrical machinery, electric motors, electrical relays/ switches or boilers.

•When storing and transporting fuel always use approved containers intended for this purpose.

•When storing the machine for long periods the fuel tank must be emptied. Contact your local petrol station to find out where to dispose of excess fuel.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•Secure the machine during transport.

WARNING! Take care when handling fuel.

! Bear in mind the risk of fire, explosion and inhaling fumes.

Adjusting the harness

WARNING! The harness must always be

! worn when working with the machine. Failure to do so means you will be unable to manoeuvre safely and this can result in injury to yourself or others.

A correctly adjusted harness and machine significantly facilitates the work. Adjust the harness to give the best working position.

Tighten the side straps so that the pressure is evenly distributed across the shoulders.

8 – English