English
Operation
ADJUSTING IDLE SPEED
-The idling speed is set for 2200 rpm at the factory. If it is necessary to adjust the idle speed, use the adjustment screw on the top side of the carburetor.
(1)Idling Adjustment Screw
STOPPING ENGINE
-Move the throttle lever to the STOP position.
(1)Stop
NOTE
If the engine does not stop when setting the ignition switch to the stop position, close the choke lever and stop the engine.
In this case, please repair the machine at your nearest servicing dealer.
(1)Choke Lever (2)OPEN (3)CLOSE
F14
(1)
F15
F16 |
(1) |
(2) |
(3) |
15
