SAFETY INSTRUCTIONS

Cutting equipment

This section describes how to choose and maintain your cutting equipment in order to:

Obtain maximum cutting performance.

Extend the life of cutting equipment.

General rules

1Only use cutting attachments with the guards we recommend! See the chapter on Technical data.

2Check the cutting attachment for damage or cracks. A damaged cutting attachment should always be replaced.

Locking nut

When fitting, tighten the nut in the opposite direction to the direction of rotation of the cutting attachment. To remove it, undo the nut in the same direction as the cutting attachment rotates. (CAUTION! The nut has a left-hand thread.)

Tighten the nut using the socket spanner. 35-50 Nm (3.5- 5 kpm).

CAUTION! The nylon lining inside the locking nut must not be so worn that you can turn it by hand. The lining should offer a resistance of at least 1.5 Nm.The nut should be replaced after it has been put on approx. 10 times.

WARNING! Never use a machine with faulty

!safety equipment. The machine’s safety equipment must be checked and maintained as described in this section. If your machine fails any of these checks contact your service agent to get it repaired.

Cutting equipment

IMPORTANT!

This section describes how to choose and maintain your cutting equipment in order to:

Reduce the risk of kickback.

Obtain maximum cutting performance.

Extend the life of cutting equipment.

Only use cutting attachments with the guards we recommend! See the chapter on Technical data.

Refer to the instructions for the cutting attachment to check the correct way to load the cord and the correct cord diameter.

Trimmer head

Only use the recommended trimmer heads and trimmer cords. These have been tested by the manufacturer to suit a particular engine size. This is especially important when a fully automatic trimmer head is used. Only use the recommended cutting attachment. See the chapter on Technical data.

Smaller machines generally require small trimmer heads and vice versa. This is because when clearing using a cord the engine must throw out the cord radially from the trimmer head and overcome the resistance of the grass being cleared.

The length of the cord is also important. A longer cord requires greater engine power than a shorter cord of the same diameter.

Make sure that the cutter on the trimmer guard is intact. This is used to cut the cord to the correct length.

To increase the life of the cord it can be soaked in water for a couple of days. This will make the line tougher so that it lasts longer.

IMPORTANT! Always ensure the trimmer cord is wound tightly and evenly around the drum, otherwise the machine will generate harmful vibration.

WARNING! Always stop the engine before

!doing any work on the cutting attachment. This continues to rotate even after the throttle has been released. Ensure that the cutting attachment has stopped completely and disconnect the HT lead from the spark plug before you start to work on it.

English – 7

Page 7
Image 7
Husqvarna 123LD, 123C manual Cutting equipment, Trimmer head

123C, 123LD, 123L specifications

The Husqvarna 123L is a lightweight and efficient trimmer designed for homeowners and garden enthusiasts seeking a reliable tool for trimming grass and managing tough weeds. It combines power, usability, and innovativeness, making it an ideal choice for maintaining residential landscapes.

At the heart of the Husqvarna 123L is a powerful 28cc two-stroke engine that delivers impressive performance while remaining lightweight. This engine is designed for optimal fuel efficiency, enabling users to work longer without frequent refueling. The low-emission technology incorporated into the engine ensures that it meets strict environmental standards, reducing the impact on the surrounding ecosystem.

One of the standout features of the Husqvarna 123L is its Smart Start technology. This innovation simplifies the starting process, allowing users to start the trimmer with minimal effort. The engine is designed to reduce resistance in the starter cord, enabling an easier pull every time. This attribute is particularly useful for those unfamiliar with small engine operation or for users who may have physical limitations.

The trimmer's ergonomically designed handle contributes to its comfort and usability. The adjustable handle allows for customization to fit the user's height and preferred operation angle, which reduces fatigue during extended use. Additionally, the trimmer features a lightweight construction, making it easy to maneuver around gardens and landscapes.

Another impressive characteristic of the Husqvarna 123L is its efficient cutting system. It comes equipped with a 0.080-inch cutting line, which provides a clean cut while ensuring durability for improved longevity. The trimmer head allows for easy line replacement, enabling users to quickly resume work without wasting time on complicated maintenance.

Moreover, the Husqvarna 123L is equipped with a heavy-duty, durable casing, ensuring that it withstands tough working conditions while providing consistent performance. The built-in air filter reduces contamination and prolongs the life of the engine, ensuring reliability with every use.

In summary, the Husqvarna 123L is an ideal choice for homeowners who need a powerful yet manageable trimmer. With its effective 28cc engine, Smart Start technology, ergonomic design, and efficient cutting system, this trimmer proves to be a valuable addition to any garden tool collection. Its commitment to power, comfort, and innovation allows users to maintain their landscapes effortlessly.