Husqvarna 125C, 125L manual Technical Data, Technical data, Engine, Ignition system, Weight, Type

TECHNICAL DATA

Technical data

Engine	125C	125L
Cylinder volume, cu.in./cm3	1.7/28	1.7/28
Cylinder bore, inch/mm	1.4/35	1.4/35
Stroke, inch/mm	1.130/28.7	1.130/28.7
Idle speed, rpm	2,800--3,200	2,800--3,200
Recommended max. speed, rpm	10,000	11,000
Speed of output shaft, rpm	8,000	8,000
Max. engine output, acc. to ISO 8893, hp/kW	1.1/0.8	1.1/0.8
Catalytic converter muffler	Yes	Yes
Speed--regulated ignition system	No	No
Ignition system
Manufacturer/type of ignition system	Walbro/CD	Walbro/CD
Spark plug	Champion	Champion
	RCJ--6Y	RCJ--6Y
Electrode gap, inch/mm	0.024/0.6	0.024/0.6
Fuel and lubrication system
Manufacturer/type of carburetor	Zama	Zama
Fuel tank capacity, US pint/liter	0.85/0.4	0.85/0.4
Weight
Weight without fuel, cutting attachment and guard, lbs/kg	10/4.4	11/4.8
Sound levels
(see note 1)
Equivalent sound pressure level at the user’s ear,
measured according to ANSI B175.3--1997, dB(A),
min/max:	94/97	94/97
Vibration levels
Vibration levels at handles, measured according to ANSI
B175.3--1997, m/s2
At idle, left/right handles:	3/5	3/5
At max. speed, left/right handles:	9/8	9/8

Note 1: Equivalent noise pressure level is calculated as the time--weighted energy total for noise pressure levels under various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.

NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values.

Model 125C (3/8 RH arbor shaft thread)

Approved accessories	Type	Cutting attachment guard, part. no.
Trimmer head	T25	537 33 83--03
Model 125L (M10 LH arbor shaft thread)
Approved accessories	Type	Cutting attachment guard, part. no.
Trimmer head	T25	537 33 83--02
Plastic blades	Tricut 300 mm	531 00 38--24
J--Handle kit (to equip
unit for brush blade)		503 78 17--01
*Brush blade		537 14 95--01

*For safety reasons, use ONLY when the trimmer has been fitted with the J--handle kit!

20