Husqvarna 13 H - page 15

English – 13

DRIVING

Warm engine:

5. Set the throttle control midway between position

1 and 2.

STOP START

IMPORTANT INFORMATION

Do not run the starter for more than about

5 seconds at a time. If the engine does not

start, wait about 10 seconds before trying

again.

6. Turn the ignition key to start position.

Cold engine:

4. Push the throttle control to position 3 (choke

position). In this position the engine receives a

richer mixture so that the engine starts more

easily.

Contents

Main Page Operators Manual for Rider 11 and Rider 13 H CONTENTS 2 N R ! These instructions are for your safety. Read them carefully. General use: Driving on slopes not Children Maintenance Page Presentation Location of the controls 4 65 3 13 2 1 12 78 9 10 11 Throttle and Choke lever Rider 13 H Speed limiter Rider 13 H Parking brake Rider 13 H Throttle and Choke lever Rider 11 Brake pedal / Parking brake Rider 11 Clutch pedal Rider 11 not Cutting unit Lever for adjustment of cutting height Lift lever for cutting unit Seat Fuelling Before starting N Starting the engine Page Driving the machine Never Cutting tips Release lever Rider 13 H Hill start, manual gearbox MAX 15 Stopping the engine Maintenance schedule Page ADD FULL Check the engines cooling air intake Check the engines oil level Checking of the fuel pumps air filter Checking and adjustment of the steering wires tightened Checking the brake Rider 11 Adjusting the brake Rider 11 Adjusting the brake Rider 13 H Check the transmissions oil level Rider 13 H FULL only Check the safety system Check the level of the battery acid Replacing the air filter Checking the cutting units parallelism Adjustment of the cutting units parallelism Dismantling the cutting unit Checking the blades Checking the tyre pressure Changing the oil Lubrication Rider 11 Lubrication General lubrication Checking and adjustment of the throttle wire Replacement of the fuel filter TROUBLE SHOOTING SCHEDULE Problem Procedure Service Winter storage STORAGE TECHNICAL DATA *3%66` EU declaration of conformity