16 – English
DRIVING
!WARNING!
Never drive the machine on ground
with a slope of more than 15°. Mow
slopes upwards and downwards,
never across. Avoid sudden changes
in direction.
2. Rider 11: Pull back the throttle lever and shift
the gear lever into neutral “N”. Turn the ignition
key to the “STOP” position.
Rider 13 H: Pull back the throttle lever and turn
the ignition key to the “STOP” position.
3. When the rider mower is stationary, hold down
the parking brake and push in the lock button.
STOP START
Release lever Rider 13 H
In order to move the machine when the engine is
switched off the release lever must be pressed
down and forwards.
Hill start, manual gearbox
1. Press down the parking brake.
2. Push the throttle control to 3/4 position to full
throttle position.
3. Push down the clutch and engage first gear.
4. Carefully release the clutch.
5. When the engine starts to pull, release the parking
brake.
Stopping the engine
Preferably allow the engine to idle for a minute to
obtain normal working temperature before stopping
it if it has been working hard.
1. Lift up the cutting unit by pulling the lever back
to the end position.

MAX 15°