Manuals / Brands / Lawn and Garden / Lawn Mower / Husqvarna / Lawn and Garden / Lawn Mower

Husqvarna 14 Pro Fuelling, Seat, Parking brake, Lever for adjustment of the cutting height

1 48

Download 48 pages, 1.9 Mb

12 – English

PRESENTATION

!WARNING!

Petrol is highly inflammable. Exercise

care and refuel outdoors (see safety

instructions).

Fuelling

The engine should be run on 85 octane (or higher)

unleaded petrol/gasoline (no added oil). Environ-

mentally adapted alkylate fuel, such as Aspen, is

also recommended.

Seat

The seat has a jointed attachment on the front edge

and can be tipped forward.

The seat can also be adjusted lengthways.

To adjust move the lever under the front edge of the

seat to the left, so that the seat can be moved

forward or backwards to the required position.

Parking brake

The parking brake is applied as follows:

1. Push down the brake pedal (1).

2. Push in the lock button on the steering column

(2).

3. Release the brake pedal while holding the

button pressed.

The parking brake lock disengages automatically

when the brake pedal is pressed.

Lever for adjustment of the cutting

height

The cutting height can be adjusted to 9 different

positions with the cutting height lever.

Cutting unit with side/rear ejector, 40-90 mm.

BioClip cutting unit, 45-95 mm.

1

2

Contents

Main Page Operators Manual for Rider 14 Pro CONTENTS 1. Safety rules for USA Safe operation practices for ride-on mowers down !! III. Children IV. Service Danger, keep hands and feet away 4 ! Read the instructions. N R EXPLANATION OF SYMBOLS Read the instructions before starting the machine. General use: Driving on slopes Be extra careful when driving on slopes. Cut slopes upwards and downwards, not sideways. Children Maintenance Never fill up with fuel indoors. Keep children away from the mowing area. Never allow children to drive the machine. Never smoke in the vicinity of the battery or the fuel. Never drive the machine in an enclosed space. Clean the machine regularly from grass, leaves and other waste. Presentation Location of the controls 87 654321 91011 12 13 14 Page Cutting unit Lift lever for cutting unit Lowering of the cutting unit Lifting of the cutting unit Fuelling Seat Parking brake Lever for adjustment of the cutting height Before starting Starting the engine Driving the machine Mowing pattern Cutting tips Stopping the engine Disengage lever MAX 15 Maintenance schedule Page Checking of the fuel pumps air filter Check the engines cooling air intake Check the engines oil level ADD FULL Check the transmissions air intake Check the transmissions oil level Checking and adjustment of the steering wires tightened up Adjusting the brakes Check the level of the battery acid only Check the safety system Replacing the air filter Fitting the cutting unit BioClip 103 Checking and adjustment of the cutting units ground pressure Installing BioClip 90 Checking the cutting units parallelism Adjusting the parallelism of the cutting unit Removing the cutting unit Removing the belt Replacing the cutting units belts BioClip 103 one Service position for cutting unit Placing in service position P Page Page Checking the blades Changing the oil ADD FULL Replacement of the oil filter Lubrication General lubrication Checking and adjustment of the throttle wire Checking the tyre pressure Replacement of the fuel filter Muffler air intake TROUBLE SHOOTING SCHEDULE Problem Procedure Winter storage STORAGE Service WIRING DIAGRAM TECHNICAL DATA Rider 14 Pro Cutting unit EU declaration of conformity