LEARN KC To “train” a second Key- Card.
Please read the information in chapter “KeyCard theft protection system - Training a second KeyCard”.
volume adjusted for the pro- gram is lower.
If the program volume is higher than the TA VOL lev- el, the traffic report will be played slightly louder.
LO/DX To adjust the seek tuning sensitivity for local or distant stations.
LO - local stations
LO 1 - high sensitivity
LO 3 - normal sensitivity
LED ON/OFF You can choose between LED ON or LED OFF. With LED ON, the KeyCard tongue will flash for extra
BEEP Acknowledgement tone for all functions which require a button to be pressed for more than 1 second.
The volume can be adjusted from between 0 to 9.
(0 = off)
TA VOL To adjust the traffic an- nouncement and beep tone volume from between 0 to 63.
The message will then come through at this volume, if the
LOUDNESS When listening at a low lev- el, the Loudness function creates a more natural sound by boosting the low frequency range.
LOUD 1 - Low boost LOUD 6 - Max. boost
STEREO/MONO
You can select between stereo or mono sound.
AM ON/OFF (Verona RCR 127)
You can deactivate one or both AM bands (MW/LW) in order to reduce the number of bands for selection with TS/BND.
selectable:
AM ON – all bands
MW OFF – LW, FM
LW OFF – MW, FM
AM OFF – FM
DX - distant stations DX 1 - high sensitivity DX 3 - normal sensitivity
You can select separate sen- sitivity levels for AM and FM.
To quit the DSC programming mode and store the adjustment:
•Press DSC.
The DSC programming mode will be auto- matically quit 8 seconds after having made the last adjustment.
34
