Blaupunkt RCR 87, RCR 127 operating instructions DSC programming, Care notes

Care notes

To avoid possible problems, we recommend you to use C-60/C-90 type cassette tapes only. Store your tapes in a cool place away from dirt, dust and temperatures exceeding 50 °Celsius. Allow very cold tapes to warm up before playing them in order to avoid uneven tape transport. After approximately 100 hours of use, dust particles collected on the playback head or roller may lead to tape run problems and sound distortions.

Use a head cleaning tape to remove nor- mal dirt build-up. For tougher cases, use a cotton swab (Q-Tip) dipped in alcohol. Do not attempt to clean by inserting a hard ob- ject into the player!

DSC programming

DSC (Direct Software Control) allows you to customise certain programmable, basic settings to suit your personal needs and preferences and then store them.

The basic settings for this audio equipment were made at the factory.

In the following you can find an overview of these settings, so that you can always reset to these if desired.

If you wish to alter any of the programming,

•press SCA/SRC to select one of the operating modes radio or cassette (cassette must be inserted).

•press DSC.

Use the rocker switch to select and adjust the functions described in the following. The display will show you the adjusted condition.

RM ON/OFF

READ KC

Refer to “Radio operation with RDS / REG - regional programme”.

(Radio Monitor)

Allows you to listen to the radio during fast winding of the tape.

RM ON – Radio playback activated.

RM OFF – Function deacti- vated.

To read out the KeyCard data.

The KeyCard supplied with the radio is used to display the model name, type number (7 6..) and the serial number.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS

/ Select function

<<>> Adjust/recall value

REG ON/OFF REG ON – regional function is switched on.

REG OFF – regional func- tion is switched off.

Using the second KeyCard to be purchased at any spe- cialised dealership it is pos- sible to display the Short Additional Memory (S.A.M.) data entered by the dealer. See chapter “Short Addition- al Memory S.A.M.”.

SVENSKA ESPAÑOL PORTUGUÊS

33