Switching off the beep tone
a)Tune into another station offering traf- fic information:
•Press the rocker switch or
•press a preset button which has a traffic programme station allocated to it.
Alternatively:
b)Switch off the priority for traffic an- nouncements:
•Press AF/TA.
“TA” will disappear from the dis- play.
Automatic seek tuning start
(tape operation)
When leaving the reception area of the tuned in traffic programme station while listening to a tape, the system will automatically start searching for a new TA programme.
If no such station is found within approxi- mately 30 seconds, you will hear a warning beep every 30 seconds. To switch off the beep tone proceed as described above.
Adjusting the volume for traffic announcements and the beep tone
This volume was preset at the factory, though you can alter the value using the DSC function (see “DSC programming – TA VOL”).
You can also change the announcement and beep volume for the current message only.
Decreasing the volume:
•Press AF/TA briefly.
The usual volume boost is now disabled and you can alter the volume as desired. The priority is deactivated for the current mes- sage only.
Increasing the volume:
•Turn the knob 1 
.
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
31
