Lubrication

Checking the engine’s oil level.

Check the oil level in the engine when the Rider stands horizontal with the engine switched off.

Open the engine cover.

Loosen the dipstick, pull it up and wipe it off.

Now insert the dipstick again, without tightening it.

Pull the dipstick out again and read the oil level.

The oil level should be between the markings on the dipstick. If the level is approaching the ADD mark, top up the oil to the FULL mark on the dipstick.

The oil is topped up through the hole the dipstick sits in. Fill the oil slowly.

Tighten the dipstick correctly before starting the engine. Start and run the engine at idling speed for approx. 30 seconds. Turn off the engine. Wait 30 seconds and check the oil level. If necessary fill so that the oil comes up to the FULL mark on the dipstick.

The following oil classes are recommended:

•API Service Class: SF, SG, SH and SJ

Choose an oil with viscosity according to the temperature ranges in the figure:

Do not mix different types of oil.

Caution when using oils such as 5W-20, 10W-30 and 10W-40 the engine’s oil consumption increases. If these oils must be used, check the oil level frequently.

Replacing the engine oil

The engine oil should be changed the first time after 5 hours running time. It should then be changed after every 100 hours of running time.

When operating with a heavy load or at high ambient temperatures, replace every 50 hours.

WARNING! Engine oil can be very hot if it is

!drained directly after stopping the engine. Allow the engine to cool somewhat first.

1Place a container underneath the engine’s left oil drain plug.

2Remove the dipstick. Remove the drain plug from the engine’s left side.

3Let the oil run out into the container.

4Fit the drain plug and tighten it.

5If necessary fill so that the oil comes up to the FULL mark on the dipstick. The oil is topped up through the hole the dipstick sits in. See Checking the engine’s oil level for filling instructions. The engine holds 1.5 litres (1.6 USqt) when the oil filter is not replaced and 1.7 litres (1.8 USqt) of oil when the oil filter is replaced.

6Run the engine warm, then check that there is no leakage from the oil plug.

IMPORTANT INFORMATION

Used engine oil is a health hazard and must not be disposed of on the ground or in nature; it should always be disposed of at a workshop or appropriate disposal location.

Avoid skin contact; wash with soap and water in case of spills.

Changing the oil filter

The oil filter must be replaced after every 200 hours running time. Turn the old oil filter anti-clockwise to remove. If necessary, use a filter remover.

Lightly lubricate the rubber seal on the new oil filter using new oil. Fit the oil filter by turning clockwise. Turn by hand until the rubber seal is seated. Now tighten a further half turn.

30 – English

Page 29 Page 31
Page 30
Image 30
Husqvarna 15V2 AWD manual Lubrication, Checking the engine’s oil level, Changing the oil filter, Replacing the engine oil
Page 29 Page 31

15V2 AWD specifications

The Husqvarna 15V2 AWD is a remarkable addition to the world of outdoor power equipment, especially designed for homeowners seeking a reliable and efficient lawn care solution. This versatile lawn mower combines robust performance with advanced technology, making yard maintenance a breeze.

One of the standout features of the Husqvarna 15V2 AWD is its all-wheel drive (AWD) system. This technology allows the mower to maintain superior traction across various terrains, ensuring optimal performance on slopes, uneven ground, and wet grass conditions. With AWD, users can navigate their lawns with ease, providing a consistent cut without the worry of slipping or losing control.

The Husqvarna 15V2 AWD is powered by a reliable engine, inherited from the brand's legacy of quality and durability. The engine is designed for efficient fuel consumption and powerful performance, allowing users to complete their mowing tasks in less time without sacrificing cutting quality. The mower's cutting deck features a durable construction that can withstand the rigors of regular use, while also providing an adjustable cutting height to tailor the lawn appearance to the user’s preference.

Ergonomically designed, the Husqvarna 15V2 AWD features an adjustable handle, providing comfort during operation. This feature, combined with its lightweight design, reduces fatigue, allowing for extended mowing sessions without discomfort. The user-friendly controls are intuitively placed for easy access, making it suitable for both novice and experienced users alike.

Another impressive characteristic of the 15V2 AWD is its ability to assimilate innovative technology for a better mowing experience. The mower is equipped with a cutting system that ensures a clean, precise cut, while mulching capabilities allow for efficient grass recycling, promoting a healthier lawn. Additionally, Husqvarna's commitment to eco-friendliness is evident in the mower's low emissions, aligning with modern environmental standards.

In summary, the Husqvarna 15V2 AWD is more than just a lawn mower; it’s a comprehensive lawn care solution that combines advanced technology, extensive features, and user-centric design. With its powerful engine, all-wheel drive capability, and ergonomic design, it stands as a reliable choice for homeowners looking to maintain their lawns with ease and precision. Whether you’re managing a small yard or tackling more extensive landscaping tasks, the 15V2 AWD is engineered to deliver exceptional results every time.
Top Page Image Contents