SERVICE AND ADJUSTMENTS

WARNING: To avoid serious injury, before per- forming any service or adjustments:

1.Be sure throttle is in STOP position.

2.Remove safety ignition key.

3.Make sure the augers and all moving

parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

SNOW THROWER

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

The chute deflector, attached to the top of the discharge chute, is provided to direct discharging snow away from the operator. If the deflector becomes damaged, it should be replaced.

WARNING: To avoid serious injury, never operate your snow thrower with the deflector removed or damaged.

To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 23)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a shear bolt and hex nut. Should a foreign ob- ject or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shear bolt. Install 1/4-20 lock nut and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS

The impeller is secured to the impeller shaft with two (2) capscrew/shear bolts and hex nuts. Should a foreign object or ice become lodged in the impeller, the capscrews are designed to break, preventing damage to any other com- ponents. If impeller does not turn when auger control lever

is engaged, check to see if the capscrews have sheared. 16

To replace the capscrew/shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

1/4-20 x 1-5/8

1/4-20 x 2

CAPSCREW /

SHOULDER /

SHEAR BOLT

SHEAR BOLT

IMPELLER

 

HUB

 

1/4-20

 

LOCKNUT

 

 

AUGER HUB

 

1/4-20 LOCKNUT

 

AUGER

 

SHAFT

 

IMPELLER

 

SHAFT

FIG. 23

TO REMOVE BELT COVER (See Fig. 24)

1.Remove two (2) screws securing belt cover to frame.

2.Remove belt cover.

Replace belt cover by installing cover and screws and tighten securely.

 

BELT

 

COVER

FRAME

SCREWS

FIG. 24

Page 16
Image 16
Husqvarna 96193006900 manual Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector, Shear Bolts See Fig

96193006901, 96193006900, 16530 EXL specifications

The Husqvarna 16530 EXL is a robust and versatile lawn mower designed to meet the needs of homeowners who demand efficiency and performance in their outdoor maintenance tasks. With model numbers 96193006901 and 96193006900, this mower stands out for its combination of advanced features, cutting-edge technology, and user-friendly operation.

One of the key characteristics of the Husqvarna 16530 EXL is its powerful engine. This mower is equipped with a reliable engine that provides ample power for tackling even the toughest grass and uneven terrains. The engine's design ensures excellent fuel efficiency, allowing users to mow large areas without frequent refueling.

The cutting deck of the Husqvarna 16530 EXL is engineered for precision and durability. It features a wide cutting width, which enables users to cover more ground in less time. The deck height can be easily adjusted, offering versatility for different grass lengths and types, ensuring that lawn care is tailored to the specific needs of each yard.

Another notable feature of the Husqvarna 16530 EXL is its innovative blade design. The mower is equipped with high-performance blades that deliver a clean and even cut, promoting healthy grass growth. Additionally, the mower's mulching capability allows for efficient nutrient recycling, as finely cut grass clippings are returned to the lawn, enriching the soil.

The design of the Husqvarna 16530 EXL prioritizes user comfort and ease of use. With ergonomic handles and intuitive controls, the mower provides a smooth and enjoyable mowing experience. The lightweight construction adds to the mower's maneuverability, making it easy to navigate around obstacles.

In terms of technology, the Husqvarna 16530 EXL incorporates features such as anti-vibration systems, which reduce fatigue during prolonged use. The mower is also designed for easy maintenance, with accessible components that facilitate quick and hassle-free servicing.

Durability is another hallmark of the Husqvarna brand, and the 16530 EXL is no exception. Built with high-quality materials, this mower is designed to withstand the rigors of regular use, ensuring longevity and reliability.

In summary, the Husqvarna 16530 EXL (96193006901, 96193006900) offers an impressive blend of power, efficiency, and user-friendly features. With its advanced technology, ergonomic design, and durable construction, this mower is an excellent choice for homeowners looking to maintain a beautiful and healthy lawn with ease.