STORAGE

Immediately prepare your snow thrower for storage at the end of the season or if the unit will not be used for 30 days or more.

WARNING: Never store the snow thrower with gasoline in the tank inside a building where fumes may reach an open flame, spark or pilot light as on a furnace, water heater, clothes dryer or gas appliance. Allow the engine to cool before storing in any enclosure.

SNOW THROWER

When snow thrower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

1.Clean entire snow thrower (See “CLEANING” in the Maintenance section of this manual).

2.Inspect and replace belts, if necessary (See “TO RE- PLACE BELTS” in the Service and Adjustments section of this manual).

3.Lubricate as shown in the Maintenance section of this manual.

4.Be sure that all nuts, bolts, screws, and pins are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

5.Touch up all rusted or chipped paint surfaces; sand lightly before painting.

ENGINE

See engine manual.

FUEL SYSTEM

IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel hose, or tank during storage. Also, alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

•Empty the fuel tank by starting the engine and letting it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in min- imizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER

1.Remove spark plug.

2.Pour one ounce (29 ml) of oil through spark plug hole into cylinder.

3.Pull recoil starter handle slowly a few times to distribute oil.

4.Replace with new spark plug.

OTHER

•Remove safety ignition key; store it in a safe place.

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your snow thrower indoors and cover it to protect it from dust and dirt.

•Cover your snow thrower with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe, which allows condensation to form and will cause your snow thrower to rust.

IMPORTANT: Never cover snow thrower while engine/ex- haust area is still warm.

19

Page 18 Page 20
Page 19
Image 19
Husqvarna 96193006900, 16530 EXL, 96193006901 manual Storage, Other, Fuel System, Engine OIL, Cylinder
Page 18 Page 20

96193006901, 96193006900, 16530 EXL specifications

The Husqvarna 16530 EXL is a robust and versatile lawn mower designed to meet the needs of homeowners who demand efficiency and performance in their outdoor maintenance tasks. With model numbers 96193006901 and 96193006900, this mower stands out for its combination of advanced features, cutting-edge technology, and user-friendly operation.

One of the key characteristics of the Husqvarna 16530 EXL is its powerful engine. This mower is equipped with a reliable engine that provides ample power for tackling even the toughest grass and uneven terrains. The engine's design ensures excellent fuel efficiency, allowing users to mow large areas without frequent refueling.

The cutting deck of the Husqvarna 16530 EXL is engineered for precision and durability. It features a wide cutting width, which enables users to cover more ground in less time. The deck height can be easily adjusted, offering versatility for different grass lengths and types, ensuring that lawn care is tailored to the specific needs of each yard.

Another notable feature of the Husqvarna 16530 EXL is its innovative blade design. The mower is equipped with high-performance blades that deliver a clean and even cut, promoting healthy grass growth. Additionally, the mower's mulching capability allows for efficient nutrient recycling, as finely cut grass clippings are returned to the lawn, enriching the soil.

The design of the Husqvarna 16530 EXL prioritizes user comfort and ease of use. With ergonomic handles and intuitive controls, the mower provides a smooth and enjoyable mowing experience. The lightweight construction adds to the mower's maneuverability, making it easy to navigate around obstacles.

In terms of technology, the Husqvarna 16530 EXL incorporates features such as anti-vibration systems, which reduce fatigue during prolonged use. The mower is also designed for easy maintenance, with accessible components that facilitate quick and hassle-free servicing.

Durability is another hallmark of the Husqvarna brand, and the 16530 EXL is no exception. Built with high-quality materials, this mower is designed to withstand the rigors of regular use, ensuring longevity and reliability.

In summary, the Husqvarna 16530 EXL (96193006901, 96193006900) offers an impressive blend of power, efficiency, and user-friendly features. With its advanced technology, ergonomic design, and durable construction, this mower is an excellent choice for homeowners looking to maintain a beautiful and healthy lawn with ease.
Top Page Image Contents