English
Safety Precautions
WORKING CONDITIONS
1.Refrain from operating the blower if you are tired, ill, or upset, or if you are under the influence of alcohol, drugs or medication
2.To reduce the risk of hearing loss associated with sound levels, hearing protection is required.
3.To reduce the risk of injury associated
with thrown objects, always wear eye protection and foot protection. Approved protective goggles must comply with standard ANSI Z87.1 in the USA or EN 166 in EU countries.
4.To reduce the risk of injury associated with the inhalation of dust, use a face filter mask in dusty conditions.
5.Wear
to help protect you against falling.
6.To reduce the risk of injury associated with objects being drawn into rotating parts, do not wear loose clothing, scarves, neck chains, unconfined long hair, or other loose material.
7.Prolonged use of a blower, exposing
the operator to vibrations and cold, may produce whitefinger disease (Raynaud’s phenomenon), the symptoms of which include tingling and burning sensations followed by loss of color and numbness in the fingers. All factors which contribute to whitefinger disease are not known, but cold weather, smoking diseases or physical conditions as well as long periods of exposure to vibration are mentioned as factors. In order to reduce the risk of whitefinger disease, the following precautions are strongly recommended
a)Keep your body warm. Never use the blower during rain.
b)Wear thick
c)Take more than 5 minutes of break in a warm place frequently.
d)Maintain a firm grip at all times, but do not squeeze the handles with constant, excessive pressure.
e)If you feel discomfort, redness and swelling of your fingers or any other part of your body, see a doctor before it gets worse.
8.The ignition system of your unit produces an electromagnetic field of a very low intensity. This field may interfere with some pacemakers. To reduce the risk of serious or fatal injury, people with pacemaker should consult their physician and the pacemaker manufacturer before operating this tool.
WORKING CIRCUMSTANCE
1. To reduce the risk of injury associated with exhaust fume inhalation, do not operate in unventilated area. The exhaust gases contain harmful carbon monoxide.
2. Avoid using the blower where stable footing and balance are not assured.
3.Never operate the machine in high wind, bad weather, when visibility is poor or in very high or low temperatures.
(Our recommended use environment is below 40 degrees C (104 degrees F).)
AVOID NOISE PROBLEM
NOTE
Check and follow the local regulations as to sound levels and hours of operations for blower.
1.Operate power equipment only at reasonable hours, not early in the morning or late at night when people might be disturbed. Comply with times listed in local ordinances.
2.To reduce sound levels, limit the number of pieces of equipment used at any one time.
3.Operate power blowers at the lowest possible throttle speed to do the job.
4.Check your equipment before operation, especially the muffler, air intakes and air filters.
WORKING PLAN
•When planning your work schedule, allow plenty of time to rest. Limit the amount of time over which the product is to be used continuously to somewhere around 30 to 40 minutes per session, and take 10 to 20 minutes of rest between work sessions. Also try to keep the total amount of work performed in a single day under 2 hours or less.
FUEL
WARNING
To reduce the risk of fire and burn injury:
a)Handle fuel with care. It is highly flammable.
b)Do not smoke while handing fuel.
c)Do not refuel a hot engine.
d)Do not refuel a running engine.
e)Avoid spilling fuel or oil. Always wipe unit dry before using.
f ) Move at least 10 ft. (3 meters) away from the fueling point before starting the engine.
g)Always store gasoline in a container approved for flammable liquids.
h)Make sure the unit is properly assembled and in good operating condition.
i ) Do not use the blower near a fire, as aiming the blower in the direction of a flame may cause flammable substances to ignite.
BEFORE STARTING THE ENGINE
•Each time before starting the engine, inspect the entire unit to see if every part is in good order and is securely tightened in place. If any damage is found in the fuel line, the exhaust line, or the ignition wiring, do not use the blower until it has been repaired.
IMPORTANT
Before starting operation, always make sure to check if any obstacles are left inside the volute case and net. The obstacles may cause serious injury or damage to fan and volute case.
6
