Manuals / Brands / Lawn and Garden / Trimmer / Husqvarna / Lawn and Garden / Trimmer

Husqvarna 223R Fitting the handlebar, Fitting blades and trimmer heads

1 32

Download 32 pages, 1.37 Mb

English – 11

ASSEMBLY

Fitting the handlebar

• Remove the screw at the rear of the throttle handle.

• Slide the throttle handle onto the right side of the

handlebar, (see diagram).

• Align the screw hole in the throttle handle with the hole in

the handlebar.

• Reﬁt the screw in the hole in the rear of the throttle handle.

�� Screw the screw through the handle and handlebar.

Tighten it.

• Fit the mounting components as shown.

• The handle mounting must be ﬁtted between the arrows

on the shaft.

• Loosely tighten the four screws.

• Put on the harness and hang the machine from the

support hook. Now make a ﬁnal adjustment so that the

machine is in a comfortable working position when it

hangs from the harness. Tighten the screws.

Fitting blades and trimmer heads

!

WARNING!

When ﬁtting the cutting attachment it is

extremely important that the raised section

on the drive disc/support ﬂange engages

correctly in the centre hole of the cutting

attachment. If the cutting attachment is ﬁtted

incorrectly it can result in serious and/or

fatal personal injury.

!

WARNING! Never use a cutting attachment

without an approved guard. See the chapter

on Technical data. If an incorrect or faulty

guard is ﬁtted this can cause serious

personal injury.

IMPORTANT! If a saw blade or grass blade are to be used

the machine must be equipped with the correct handlebar,

blade guard and harness.

Contents

Main 223R Page CONTENTS Contents Note the f ollowing before starting: INTR ODUCTION Dear customer! Page Impor tant Personal protective equipment Mac hment guard Cutting attac witch s safety equipment hine A B Vibration damping system Quic k release Mufer GENERAL SAFETY PRECAUTIONS Locking nut Cutting equipment Cutting equipment General rules GENERAL SAFETY PRECAUTIONS Sharpening grass cutters and grass blades Trimmer head Fitting the handlebar Fitting blades and trimmer heads Fitting a blade guard, grass blade and grass cutter Fitting a trimmer guard and Superauto II 1" trimmer head Fitting other guards and cutting attachments Adjusting the harness and clearing saw Standard harness Quick release Spreading the load on your shoulders Correct height FUEL HANDLING Fuel safety Transport and storage Fuel Gasoline FUEL HANDLING Mixing Fueling STARTING AND STOPPING Check before starting Starting and stopping Starting STARTING AND STOPPING Stopping WORKING TECHNIQUES General working instructions Basic safety rules Basic working techniques WORKING TECHNIQUES Grass clearing using a grass blade Grass trimming with a trimmer head Trimming Clearing Carburetor Function Basic setting Fine adjustment Conditions Fine adjustment of the idle speed T High speed jet H Correctly adjusted carburetor Adjusting the start throttle speed Mufer Cooling system Bevel gear Air lter Cleaning the air lter Oiling the air lter Drive shaft Spark plug Maintenance schedule TECHNICAL DATA Technical data 26 FEDERAL EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS MANUFACTURERS WARRANTY COVERAGE OWNERS WARRANTY RESPONSIBILITIES WARRANTY COMMENCEMENT DATE