ASSEMBLY
Assembling the handlebars (227R/RD, 232R/RD)
•Remove the screw at the
rear of the throttle handle.
• Slide on the throttle handle on the
•Align the hole in the
throttle handle for the fixing screw with the hole on the handlebars.
•Refit the screw in the rear of the throttle handle.
• Fit the screw through the
throttle handle and the handlebars and tighten.
•Unscrew the handle from the handlebar bracket.
•Position the handlebars as shown. Fit the bracket components and tighten
the handle lightly.
• Put on the harness and hang the machine in the suspension hook. Now finely adjust so that the machine gives a comfortable working position when it‘s attached to the harness. Tighten the handle.
18 – English
Assembling the handlebars (235R)
•Remove the screw at the rear of the throttle handle.
• Slide on the throttle handle on the
•Align the hole in the throttle handle for the fixing screw with the hole
on the handlebars.
• Refit the screw in the rear of the throttle handle.
• Fit the screw through the
throttle handle and the handlebars and tighten.
• Unscrew the bracket components from the handlebar bracket.
• Position the handlebars as shown. Fit the bracket components and tighten the handle lightly.
• Fit the cabling as shown.
• Put on the harness and hang the machine in the suspension hook. Now finely adjust so that the machine gives a comfortable working position when it‘s attached to the harness. Tighten the handle.
Transport position, handlebars
• The handlebars can easily be turned to fit along the shaft for easy transportation and storage.
•Loosen the knob. Turn the
handles clockwise so that the throttle comes against the engine.
•Thereafter fold the handlebars around the shaft. Tighten the handle.
•Attach the transport guard.
