3. INSTALLATION
The charging station must be positioned on relatively level ground. The height difference must not differ more than 5 cm between the front and rear of the charging station.
The charging station must not be positioned so that its plate bends.
Consider the distance to a wall socket when choosing the position. The charging station should be connected to a 230V wall socket via the low voltage cable and transformer.
The supplied low voltage cable is 20 metres long.
Tip! It is possible to let the low voltage cable cross the working area. It must then be either stapled down or buried. In some cases there is a better positioning option for the charging station than close to a house wall or by the closest wall socket.
IMPORTANT INFORMATION
The low voltage cable must not be extended.
The transformer must be placed where it is well ventilated and is not exposed to direct sunlight. It is also beneficial if the transformer can be placed under a roof.
It is recommended to use an earth
Do not put the charging station in a corner or pocket in the working area.
English - 19 |
