Husqvarna 232R manual Technical Data, Technical data

TECHNICAL DATA

Technical data

Technical data	232R	235R, 235FR
Engine
Cylinder displacement, cu.in/cm3	1,88/30,8	2,21/36,3
Cylinder bore, inch/mm	1,38/35	1,50/38,0
Stroke, inch/mm	1,26/32	1,26/32
Idle speed, rpm	2700	2700
Recommended max. speed, rpm	11000-11700	11000-11700
Speed of output shaft, rpm	10000	10000
Max. engine output, acc. to ISO 8893, kW/ rpm	1,1/8400	1,3/9000
Catalytic converter muffler	Yes	Yes
Speed-regulated ignition system	Yes	Yes
Ignition system
Manufacturer/type of ignition system	Walbro CD	Walbro CD
Spark plug	NGK BPMR 7A/	NGK BPMR 7A/
	Champion RCJ 7Y	Champion RCJ 7Y
Electrode gap, inch/mm	0,02/0,5	0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburetor	Walbro WT	Walbro WT
Fuel tank capacity, US pint/litre	1,06/0,5	1,06/0,5
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 14,3/6,5		15,6/7,1
Sound levels
(see note 1)
Equivalent noise pressure level at the operator’s ear,
measured according to EN/ISO 11806 and ISO 7917,	90/100	96/99
dB(A), min./max.:
Vibration levels
Vibration levels at handles, measured according to
ANSI B175.3-1997, m/s2
At idle, left/right handles, min.:	2,5/2,5	1,9/1,7
At idle, left/right handles, max.:	3,0/3,5	2,9/4,7
At max. speed, left/right handles, min.:	2,0/2,0	6,8/2,8
At max. speed, left/right handles, max.:	5,1/4,9	9,3/5,5

Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various

working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.

NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values.

English – 31