Cutting equipment

GENERAL SAFETY PRECAUTIONS

Will my hand always activate the chain brake during a kickback?

No. It takes a certain force to move the hand guard forward. If your hand only lightly touches the front guard or slips over it, the force may not be enough to trigger the chain brake.You should also maintain a ﬁrm grip of the chain saw handles while working. If you do and experience a kickback, your hand may never leave the front handle and will not activate the chain brake, or the chain brake will only activate after the saw has swung around a considerable distance. In such instances, the chain brake might not have enough time to stop the saw chain before it touches you. There are also certain positions in which your hand cannot reach the front hand guard to activate the chain brake; for example, when the saw chain is held in felling position.

Will my inetria activated chain brake always activate during kickback in the event of a kickback?

No. First your brake must be in working order. Testing the brake is simple, see instructions under the heading Checking, maintaining and servicing chain saw safety equipment. We recommend you do before you begin each work session. Second the kickback must be strong enough to activate the chain brake. If the chain brake is too sensitive it would activate all the time which would be a nuisance.

Will my chain brake always protect me from injury in the event of a kickback?

No. First, the chain brake must be in working order to provide the intended protection. Second, it must be activated during the kickback as described above to stop the saw chain. Third, the chain brake may be activated but if the bar is too close to you the brake might not have enough time to slow down and stop the chain before the chain saw hits you.

Only you and proper working technique can eliminate kickback and its danger.

Throttle lockout

The throttle lockout is designed to prevent accidental operation of the throttle control. When you press the lock

(A)(i.e. when you grasp the handle) it releases the throttle control (B). When you release the handle the throttle control and the throttle lockout both move back to their original positions.This arrangement means that the throttle control is automatically locked at the idle setting. (5)

Chain catcher

The chain catcher is designed to catch the chain if it snaps or jumps off.This should not happen if the chain is properly tensioned (see instructions under the heading Assembly) and if the bar and chain are properly serviced and maintained (see instructions under the heading General working instructions).

Right hand guard

Apart from protecting your hand if the chain jumps or snaps, the right hand guard stops branches and twigs from interfering with your grip on the rear handle.

Vibration damping system

Your machine is equipped with a vibration damping system that is designed to reduce vibration and make operation easier.

10 – English

The machine′s vibration damping system reduces the transfer of vibration between the engine unit/cutting equipment and the machine′s handle unit. The body of the chain saw, including the cutting equipment, is insulated from the handles by vibration damping units.

Cutting hardwoods (most broadleaf trees) creates more vibration than cutting softwoods (most conifers). Cutting with cutting equipment that is blunt or faulty (wrong type or badly sharpened) will increase the vibration level.

WARNING! Overexposure to vibration can

! lead to circulatory damage or nerve damage in people who have impaired circulation. Contact your doctor if you experience symptoms of overexposure to vibration. Such symptoms include numbness, loss of feeling, tingling, pricking, pain, loss of strength, changes in skin colour or condition.These symptoms normally appear in the ﬁngers, hands or wrists.These symptoms may be increased in cold temperatures.

Stop switch

Use the stop switch to switch off the engine.

Mufﬂer

The mufﬂer is designed to reduce noise levels and to direct exhaust fumes away from the user.

WARNING! The exhaust fumes from the

! engine are hot and may contain sparks which can start a ﬁre. Never start the machine indoors or near combustible material!

In areas with a hot, dry climate there is a high risk of ﬁres. These areas are sometimes subject to government rules requiring among other things the mufﬂer must be equipped with an approved type of spark arrestor screen (A). (6)

CAUTION! The mufﬂer gets very hot during and after use.This also applies during idling. Be aware of the ﬁre hazard, especially when working near ﬂammable substances and/or vapours.

WARNING! Never use a saw without a

! mufﬂer, or with a damaged mufﬂer. A damaged mufﬂer may substantially in- crease the noise level and the ﬁre hazard. Keep ﬁre ﬁghting equipment handy. If a spark arrestor screen is required in your area, never use the saw without or with a broken spark arrestor screen.

This section describes how to choose and maintain your cutting equipment in order to:

•Reduce the risk of kickback.

•Reduce the risk of the saw chain breaking or jumping off the bar.

•Obtain optimal cutting performance.

•Extend the life of cutting equipment.

•Avoid increasing vibration levels.

5451546-92 Rev.3 2007-12-19

240e, 235e specifications

The Husqvarna 235E and 240E are two popular models in the world of lightweight chain saws, designed to deliver excellent performance for both novice and experienced users. Ideal for homeowners and professionals alike, these models are perfect for tasks such as cutting firewood, pruning, and handling small trees.

One of the standout features of the Husqvarna 235E and 240E is their lightweight construction. Weighing in at around 10.3 pounds, these chainsaws are easy to maneuver, reducing fatigue during extended use. The ergonomic design enhances comfort, making it easier for users to maintain a firm grip, especially during challenging cutting tasks.

These models are equipped with the powerful X-Torq engine technology, which provides a significant increase in efficiency. The X-Torq engine reduces fuel consumption by up to 20%, allowing users to work longer without the need for frequent refueling. Additionally, the engine's design minimizes harmful emissions, making the 235E and 240E more environmentally friendly.

Another important characteristic is the chainsaw’s emissions control system. Husqvarna has integrated an efficient air filtration system in both models, ensuring that dirt and debris are kept away from the engine for extended periods. This results in less maintenance and longer operational life.

Ease of starting is also a highlight of these models. The Smart Start technology ensures that the chainsaw can be started with minimal effort, allowing users to get to work quickly. The combined choke and stop control further simplify the starting process, ensuring a smooth operation every time.

Safety features are not overlooked in the Husqvarna 235E and 240E. Each model comes with a chain brake that responds quickly to stop the chain in case of kickback, which is essential for preventing accidents during operation. The low-vibration design reduces strain on the hands and arms, fostering a safer and more comfortable user experience.

Overall, the Husqvarna 235E and 240E offer a combination of power, efficiency, and user-friendly features that set them apart in their category. With a focus on performance and safety, these chainsaws are an excellent choice for anyone looking to tackle cutting, trimming, and pruning tasks with ease and confidence. Whether you are a homeowner looking to manage your yard or a professional seeking reliable equipment, the 235E and 240E are worthy contenders.

Husqvarna 235e, 240e manuel dutilisation Cutting equipment