FEDERAL EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The EPA (The US Environmental Protection Agency), CARB (California Air Resources Board) and Husqvarna are pleased to explain the emissions control system warranty on your 2007 and later small nonroad engine. In U.S. and Canada, new small nonroad engines must be designed, built and equipped to meet the federal stringent anti-smog standards. Husqvarna must warrant the emission control system on your small nonroad engine for the period of time listed below provided there has been no abuse, neglect or improper maintenance of your unit.Your emission control system includes parts such as the carburetor, the ignition system and the fuel tank (California only).Where a warrantable condition exists, Husqvarna will repair your small nonroad engine at no cost to you. Expenses covered under warranty include diagnosis, parts and labor.

MANUFACTURER′S WARRANTY

COVERAGE

The 2007 and later small nonroad engines are warranted for two years. If any emission related part on you engine (as listed above) is defective, the part will be repaired or replaced by Husqvarna.

OWNER′S WARRANTY

RESPONSIBILITIES

As the small nonroad engine owner, you are responsible for the performance of the required maintenance listed in your Operator′s Manual. Husqvarna recommends that you retain all receipts covering maintenance on your small nonroad engine, but Husqvarna cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance. As the small nonroad engine owner, you should, however, be aware that Husqvarna may deny you warranty coverage if your small nonroad engine or a part of it has failed due to abuse, neglect, improper maintenance, unapproved modifications or the use of parts not made or approved by the original equipment manufacturer. You are responsible for presenting your small nonroad engine to a Husqvarna authorized servicing dealer as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Husqvarna at 1-800- 487-5963.

WARRANTY COMMENCEMENT DATE

The warranty period begins on the date small nonroad engine is delivered.

LENGTH OF COVERAGE

Husqvarna warrants to the initial owner and each subsequent purchaser that the engine is free from defects in materials and workmanship which cause the failure of a warranted part for a period of two years.

WHAT IS COVERED

REPAIR OR REPLACEMENT OF PARTS Repair or replacement of any warranted part will be performed at no

charge to the owner at an approved Husqvarna servicing dealer. If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Husqvarna at 1-800- 487-5963.

WARRANTY PERIOD Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled only for regular inspection to the effect of “repair or replace as necessary” shall be warranted for 2 years. Any warranted part which is scheduled for replacement as required maintenance shall be warranted for the period of time up to the first scheduled replacement point for that part.

DIAGNOSIS The owner shall not be charged for diagnostic labor which leads to the determination that a warranted part is defective, if the diagnostic work is performed at an approved Husqvarna servicing dealer.

CONSEQUENTIAL DAMAGES Husqvarna may be liable for damages to other engine components caused by the failure of a warranted part still under warranty.

WHAT IS NOT COVERED

All failures caused by abuse, neglect or improper maintenance are not covered.

ADD -ON OR MODIFIED PARTS

The use of add-on or modified parts can be grounds for disallowing a warranty claim. Husqvarna is not liable to cover failures of warranted parts caused by the use of add- on or modified parts.

HOW TO FILE A CLAIM

If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Husqvarna at 1-800- 487-5963.

WHERE TO GET WARRANTY SERVICE

Warranty services or repairs shall be provided at all Husqvarna authorized servicing dealers.

MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS

Any Husqvarna approved replacement part used in the performance of any warranty maintenance or repairs on emission-related parts, will be provided without charge to the owner if the part is under warranty.

EMISSION CONTROL WARRANTY PARTS LIST

1Carburetor

2 Spark plug

3 Ignition Module

4 Fuel tank (California only)

MAINTENANCE STATEMENT

The owner is responsible for the performance of all required maintenance, as defined in the operator’s manual.

24 – English

5451546-92 Rev.3 2007-12-19

Page 23 Page 25
Page 24
Image 24
Husqvarna 235e, 240e manuel dutilisation Federal Emission Control Warranty Statement, Your Warranty Rights and Obligations
Page 23 Page 25

240e, 235e specifications

The Husqvarna 235E and 240E are two popular models in the world of lightweight chain saws, designed to deliver excellent performance for both novice and experienced users. Ideal for homeowners and professionals alike, these models are perfect for tasks such as cutting firewood, pruning, and handling small trees.

One of the standout features of the Husqvarna 235E and 240E is their lightweight construction. Weighing in at around 10.3 pounds, these chainsaws are easy to maneuver, reducing fatigue during extended use. The ergonomic design enhances comfort, making it easier for users to maintain a firm grip, especially during challenging cutting tasks.

These models are equipped with the powerful X-Torq engine technology, which provides a significant increase in efficiency. The X-Torq engine reduces fuel consumption by up to 20%, allowing users to work longer without the need for frequent refueling. Additionally, the engine's design minimizes harmful emissions, making the 235E and 240E more environmentally friendly.

Another important characteristic is the chainsaw’s emissions control system. Husqvarna has integrated an efficient air filtration system in both models, ensuring that dirt and debris are kept away from the engine for extended periods. This results in less maintenance and longer operational life.

Ease of starting is also a highlight of these models. The Smart Start technology ensures that the chainsaw can be started with minimal effort, allowing users to get to work quickly. The combined choke and stop control further simplify the starting process, ensuring a smooth operation every time.

Safety features are not overlooked in the Husqvarna 235E and 240E. Each model comes with a chain brake that responds quickly to stop the chain in case of kickback, which is essential for preventing accidents during operation. The low-vibration design reduces strain on the hands and arms, fostering a safer and more comfortable user experience.

Overall, the Husqvarna 235E and 240E offer a combination of power, efficiency, and user-friendly features that set them apart in their category. With a focus on performance and safety, these chainsaws are an excellent choice for anyone looking to tackle cutting, trimming, and pruning tasks with ease and confidence. Whether you are a homeowner looking to manage your yard or a professional seeking reliable equipment, the 235E and 240E are worthy contenders.
Top Page Image Contents