ASSEMBLY

arrow in the diagram shows the area where you should operate the socket spanner when loosening or tightening the nut.

Fitting the blade guard and saw blade (235R, 235FR)

•Remove the mounting plate (H). Fit the adapter (I) and bracket (J) with the two screws (K) as shown. Fit the blade guard (A) to the adapter using the 4 screws (L) as shown.

K

J

H

I

A

L

CAUTION! Always use the recommended guard for the cutting attachment you are using. See chapter on Technical data.

G

F

D

B

C

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•Place the blade (D) and support flange (F) on the output shaft.

•Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit. Hold the shaft of the spanner as close to the blade

guard as possible. To tighten the nut, turn the spanner in the opposite direction to the direction of rotation (Caution! left-hand thread).

•When loosening and tightening the saw blade nut, there is a risk of injury from the teeth of the saw blade.You should therefore always ensure that your hand is shielded by the blade guard when doing this. Always use a socket spanner with a shaft that is long enough to allow this. The arrow in the diagram shows the area where you should operate the socket spanner when loosening or tightening the nut.

Fitting a trimmer guard and Superauto II 1” trimmer head (232R)

K

G

F

K IB

C

JM

I L

A

•Fit the correct trimmer guard (A) for use with the trimmer head. Secure the trimmer guard using the 4 screws (L) and the support plate (M) as shown.

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•To fit the trimmer head, first separate the two halves (see diagram). Proceed as follows:

•Insert a finger into the centre hole of the cover (I) while grasping the cover with your other fingers. Using the index finger and thumb of your other hand, release the two catches (J) that engage in the cut-outs in the bottom half

(K). Pull apart the trimmer head, grasping the cover firmly.

English – 15

Page 14 Page 16
Page 15
Image 15
Husqvarna manual Fitting the blade guard and saw blade 235R, 235FR
Page 14 Page 16

235FR specifications

The Husqvarna 235FR is a powerful and versatile brushcutter designed for both professional landscapers and dedicated homeowners. Its robust engineering and innovative features make it an essential tool for tackling tough cutting tasks, whether you're clearing dense brush, trimming weeds, or managing overgrown areas.

One of the standout features of the 235FR is its lightweight yet durable construction. Weighing in at just around 7.5 kg (with cutting equipment), it allows users to maneuver effortlessly while providing high performance. The sleek design ensures that it can easily navigate tight spaces and challenging terrains, making it perfect for both residential and commercial use.

The engine of the Husqvarna 235FR is a reliable 1.1 kW, 2-stroke model that ensures ample power without sacrificing fuel efficiency. This engine is equipped with Air Injection technology, which efficiently separates and removes larger debris particles before they reach the air filter. This feature not only extends the lifespan of the filter but also significantly reduces maintenance time, allowing users to focus more on their work.

The 235FR also features an ergonomic design, with an adjustable handle that optimizes comfort and control during extended use. The anti-vibration system effectively minimizes fatigue, making it easier to work longer hours without discomfort. Additionally, the Soft Start mechanism reduces resistance in the starter cord, making the brushcutter easier to start.

Versatility is a key aspect of the 235FR, which is compatible with a variety of attachments. Users can easily switch between different cutting heads, such as trimmers, saw blades, and brush blades, depending on the specific task at hand. This adaptability enhances its functionality, making it ideal for various landscaping projects.

Moreover, the Husqvarna 235FR is designed with ease of use in mind. Features like the fuel indicator and easy-to-reach controls ensure that users can operate the machine with minimal effort. The efficient design of the cutting equipment reduces line wear, allowing for longer intervals between spool changes.

Overall, the Husqvarna 235FR stands out in the market for its combination of power, efficiency, and user-focused features. Whether you're a professional landscaper or a homeowner looking to maintain your garden, this brushcutter offers the performance and reliability needed to tackle any cutting challenge with ease.
Top Page Image Contents