Manuals / Husqvarna / Lawn and Garden / Trimmer

Husqvarna 235FR manual Cutting equipment, Locking nut

Models: 235FR

1 44
Download 44 pages 5.41 Kb
Page 9
Image 9

GENERAL SAFETY PRECAUTIONS

Never use a machine that has a faulty muffler.

Regularly check that the muffler is securely attached to the machine.

If the muffler on your machine is fitted with a spark arrestor mesh this must be cleaned regularly. A blocked mesh will cause the engine to overheat and may lead to serious damage.

WARNING! Mufflers fitted with catalytic

!converters get very hot during use and remain so for some time after stopping. This also applies at idle speed. Contact can result in burns to the skin. Remember the risk of fire!

WARNING! The inside of the muffler contain

!chemicals that may be carcinogenic. Avoid contact with these elements in the event of a damaged muffler.

WARNING! Bear in mind that:

!The exhaust fumes from the engine are hot and may contain sparks which can start a fire. Never start the machine indoors or near combustible material!

Locking nut

A locking nut is used to secure some types of cutting attachment.

When fitting, tighten the nut in the opposite direction to the direction of rotation of the cutting attachment. To remove it, undo the nut in the same direction as the cutting attachment rotates. (CAUTION! The nut has a left-hand thread.) When loosening and tightening the saw blade nut, there is a risk of injury from the teeth of the saw blade. You should therefore always ensure that your hand is shielded by the blade guard when doing this. Always use a socket spanner with a shaft that is long enough to allow this. The arrow in the diagram shows the area where you should operate the socket spanner when loosening or tightening the nut.

The nylon lining inside the locking nut must not be so worn that you can turn it by hand. The lining should offer a resistance of at least 1.5 Nm. The nut should be replaced after it has been put on approx. 10 times.

Cutting equipment

This section describes how to choose and maintain your cutting equipment in order to:

•Reduce the risk of blade thrust.

•Obtain maximum cutting performance.

•Extend the life of cutting equipment.

IMPORTANT!

Only use cutting attachments with the guards we recommend! See the chapter on Technical data.

Refer to the instructions for the cutting attachment to check the correct way to load the cord and the correct cord diameter.

Keep the teeth of the blade correctly sharpened! Follow our recommendations. Also refer to the instructions on the blade packaging.

Maintain the correct blade setting! Follow our instructions and use the recommended file gauge.

WARNING! Always stop the engine before

!doing any work on the cutting attachment. This continues to rotate even after the throttle has been released. Ensure that the cutting attachment has stopped completely and disconnect the HT lead from the spark plug before you start to work on it.

WARNING! Using an incorrect cutting

!attachment or an incorrectly sharpened blade increases the risk of blade thrust.

English – 9

Page 8 Page 10
Page 9
Image 9
Husqvarna 235FR manual Cutting equipment, Locking nut
Page 8 Page 10

235FR specifications

The Husqvarna 235FR is a powerful and versatile brushcutter designed for both professional landscapers and dedicated homeowners. Its robust engineering and innovative features make it an essential tool for tackling tough cutting tasks, whether you're clearing dense brush, trimming weeds, or managing overgrown areas.

One of the standout features of the 235FR is its lightweight yet durable construction. Weighing in at just around 7.5 kg (with cutting equipment), it allows users to maneuver effortlessly while providing high performance. The sleek design ensures that it can easily navigate tight spaces and challenging terrains, making it perfect for both residential and commercial use.

The engine of the Husqvarna 235FR is a reliable 1.1 kW, 2-stroke model that ensures ample power without sacrificing fuel efficiency. This engine is equipped with Air Injection technology, which efficiently separates and removes larger debris particles before they reach the air filter. This feature not only extends the lifespan of the filter but also significantly reduces maintenance time, allowing users to focus more on their work.

The 235FR also features an ergonomic design, with an adjustable handle that optimizes comfort and control during extended use. The anti-vibration system effectively minimizes fatigue, making it easier to work longer hours without discomfort. Additionally, the Soft Start mechanism reduces resistance in the starter cord, making the brushcutter easier to start.

Versatility is a key aspect of the 235FR, which is compatible with a variety of attachments. Users can easily switch between different cutting heads, such as trimmers, saw blades, and brush blades, depending on the specific task at hand. This adaptability enhances its functionality, making it ideal for various landscaping projects.

Moreover, the Husqvarna 235FR is designed with ease of use in mind. Features like the fuel indicator and easy-to-reach controls ensure that users can operate the machine with minimal effort. The efficient design of the cutting equipment reduces line wear, allowing for longer intervals between spool changes.

Overall, the Husqvarna 235FR stands out in the market for its combination of power, efficiency, and user-focused features. Whether you're a professional landscaper or a homeowner looking to maintain your garden, this brushcutter offers the performance and reliability needed to tackle any cutting challenge with ease.