Fuel Handling / Starting and Stopping

WARNING! Never use a machine with

! visible damage to the spark plug guard and ignition cable. A risk of sparking arises, which can cause a ﬁre.

Transport and storage

•Always store the chain saw and fuel so that there is no risk of leakages or fumes coming into contact with sparks or naked ﬂames from electrical equipment, electric motors, relays/switches, boilers and the like.

•Always store fuel in an approved container designed for that purpose.

•For longer periods of storage or for transport of the chain saw, the fuel and chain oil tanks should be emptied. Ask where you can dispose of waste fuel and chain oil at your local gas station.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The bar guard must always be ﬁtted to the cutting attachment when the machine is being transported or in storage, in order to prevent accident contact with the sharp chain. Even a non-moving chain can cause serious cuts to yourself or persons you bump into with an exposed chain.

Long-term storage

Empty the fuel/oil tanks in a well ventilated area. Store the fuel in approved cans in a safe place. Fit the bar guard. Clean the machine. See instructions under the heading Maintenance schedule.

Starting and stopping

WARNING! Note the following before

!starting:

The chain brake must be engaged when the chain saw is started to reduce the chance of contact with the moving chain during starting.

Never start a chain saw unless the bar, chain and all covers are ﬁtted correctly. Otherwise the clutch can come loose and cause personal injuries.

Place the machine on ﬁrm ground. Make sure you have a secure footing and that the chain cannot touch anything.

Keep people and animals well away from the working area.

Cold engine

Starting: The chain brake should be activated when starting the chain saw. Activate the chain brake by pushing the front hand guard forwards. (21)

Choke: Pull the blue choke/fast idle lever out to the full extent (to the FULL CHOKE position). When the choke/fast idle lever is pulled out to the full extent, the correct throttle setting is set automatically. (22)

Start throttle: The correct choke/start throttle setting is obtained by moving the control to the choke position. (23)

Air purge: Press the air purge repeatedly until fuel begins to ﬁll the bulb. The bulb need not be completely ﬁlled. (24)

Warm engine

Use the same procedure as for starting a cold engine but without setting the choke control in the choke position. Set the throttle to the start position by pulling out the blue choke control to the choke position and then pushing it in again. (25)

Starting

Grip the front handle with your left hand. Hold the chain saw on the ground by placing your right foot through the rear handle. Pull the starter handle with your right hand and pull out the starter cord slowly until you feel a resistance (as the starter pawls engage) then pull ﬁrmly and rapidly. Never wrap the starter cord around your

hand (26)

CAUTION! Do not pull the starter cord all the way out and do not let go of the starter handle when the cord is fully extended. This can damage the machine.

Push in the choke control as soon as the engine ﬁres which can be heard through a "puff" sound. Keep on pulling the cord powerfully until the engine starts. (27)

As the chain brake is still engaged the speed of the engine must be set to idling as soon as possible, this is achieved by quickly pressing the throttle trigger once. This prevents unnecessary wear to the clutch, clutch drum and brake band.

Note! Reactivate the chain brake by pushing the front hand guard back (marked ”PULL BACK TO RESET”) towards the front handle.The chain saw is now ready for use.There is a simpliﬁed start reminder with illustrations to describe each step on the rear edge of the saw (A). (28)

WARNING! Long term inhalation of the

! engine’s exhaust fumes, chain oil mist and dust from sawdust can represent a health risk.

• Never start a chain saw unless the bar, chain and all covers are ﬁtted correctly. See instructions under the heading Assembly. Without a bar and chain attached to the chain saw the clutch can come loose and cause serious injury. (29)

• The chain brake should be activated when starting. Se instructions under the heading Start and stop. Do not drop start. This method is very dangerous because you may lose control of the saw. (30)

• Never start the machine indoors. Exhaust fumes can be dangerous if inhaled.

• Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment.

• Always hold the saw with both hands. The right hand should be on the rear handle, and the left hand on the front handle. All people, whether right or left handed, should use this grip. Use a ﬁrm grip with thumbs and ﬁngers encircling the chain saw handles. (31)

Stopping

Stop the engine by pressing down the stop button. (32)

5451546-93 Rev.4 2008-04-16

English – 15

235, 240 specifications

The Husqvarna 235 and 240 chainsaws are compact, lightweight power tools designed for homeowners and occasional users seeking reliability and performance. Known for their ease of use and versatility, both models are ideal for tasks such as pruning, cutting firewood, and clearing small trees.

One of the main features of the Husqvarna 235 and 240 is their X-Torq engine technology. This innovation reduces fuel consumption by up to 20% while also cutting emissions by approximately 75%. This not only makes the chainsaws environmentally friendly but also saves users on fuel costs over time. The engine's design also enhances torque, providing ample power for cutting through wood efficiently.

Both models come equipped with an inertia-activated chain brake, enhancing safety by preventing unwanted chain movement in case of a kickback. The chain brake is a critical feature for novice users, promoting confidence while operating the chainsaw. This focus on safety extends to the easy-to-reach throttle lockout and combined choke/stop control, allowing for simpler starting procedures.

The Husqvarna 235 and 240 feature an adjustable oil pump, which enables users to control the oil flow to the chain according to their specific needs. This functionality not only prolongs the life of the chain and bar but also helps maintain cutting performance, ensuring smoother operation and reduced wear.

These chainsaws also have ergonomic designs, with comfortable handles that minimize vibrations and allow for prolonged use without fatigue. The lightweight structure makes them easily maneuverable, which is particularly beneficial for tasks that require precision casing or reaching difficult areas.

Another noteworthy characteristic is the Tool-less chain tensioning system. This feature allows users to adjust the chain tension quickly and without the need for additional tools, simplifying maintenance and enhancing user experience.

Overall, the Husqvarna 235 and 240 chainsaws are excellent choices for homeowners seeking reliable, efficient, and easy-to-use tools for light to moderate cutting tasks. With advanced features like X-Torq technology, safety mechanisms, and user-friendly designs, they represent a valuable addition to any gardening or outdoor toolkit.

Husqvarna 235, 240 manuel dutilisation Fuel Handling / Starting and Stopping, Starting and stopping

Models: 235 240