Federal Emission Control Warranty Statement

FEDERAL EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The EPA (The US Environmental Protection Agency), CARB (California Air Resources Board) and Husqvarna are pleased to explain the emissions control system warranty on your 2007 and later small nonroad engine. In U.S. and Canada, new small nonroad engines must be designed, built and equipped to meet the federal stringent anti-smog standards. Husqvarna must warrant the emission control system on your small nonroad engine for the period of time listed below provided there has been no abuse, neglect or improper maintenance of your unit.Your emission control system includes parts such as the carburetor, the ignition system and the fuel tank (California only).Where a warrantable condition exists, Husqvarna will repair your small nonroad engine at no cost to you. Expenses covered under warranty include diagnosis, parts and labor.

MANUFACTURER′S WARRANTY

COVERAGE

The 2007 and later small nonroad engines are warranted for two years. If any emission related part on you engine (as listed above) is defective, the part will be repaired or replaced by Husqvarna.

OWNER′S WARRANTY

RESPONSIBILITIES

As the small nonroad engine owner, you are responsible for the performance of the required maintenance listed in your Operator′s Manual. Husqvarna recommends that you retain all receipts covering maintenance on your small nonroad engine, but Husqvarna cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance. As the small nonroad engine owner, you should, however, be aware that Husqvarna may deny you warranty coverage if your small nonroad engine or a part of it has failed due to abuse, neglect, improper maintenance, unapproved modiﬁcations or the use of parts not made or approved by the original equipment manufacturer. You are responsible for presenting your small nonroad engine to a Husqvarna authorized servicing dealer as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Husqvarna at 1-800- 487-5963.

WARRANTY COMMENCEMENT DATE

The warranty period begins on the date small nonroad engine is delivered.

LENGTH OF COVERAGE

Husqvarna warrants to the initial owner and each subsequent purchaser that the engine is free from defects in materials and workmanship which cause the failure of a warranted part for a period of two years.

WHAT IS COVERED

REPAIR OR REPLACEMENT OF PARTS Repair or replacement of any warranted part will be performed at no

charge to the owner at an approved Husqvarna servicing dealer. If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Husqvarna at 1-800- 487-5963.

WARRANTY PERIOD Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled only for regular inspection to the effect of “repair or replace as necessary” shall be warranted for 2 years. Any warranted part which is scheduled for replacement as required maintenance shall be warranted for the period of time up to the ﬁrst scheduled replacement point for that part.

DIAGNOSIS The owner shall not be charged for diagnostic labor which leads to the determination that a warranted part is defective, if the diagnostic work is performed at an approved Husqvarna servicing dealer.

CONSEQUENTIAL DAMAGES Husqvarna may be liable for damages to other engine components caused by the failure of a warranted part still under warranty.

WHAT IS NOT COVERED

All failures caused by abuse, neglect or improper maintenance are not covered.

ADD -ON OR MODIFIED PARTS

The use of add-on or modiﬁed parts can be grounds for disallowing a warranty claim. Husqvarna is not liable to cover failures of warranted parts caused by the use of add- on or modiﬁed parts.

HOW TO FILE A CLAIM

If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Husqvarna at 1-800- 487-5963.

WHERE TO GET WARRANTY SERVICE

Warranty services or repairs shall be provided at all Husqvarna authorized servicing dealers.

MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS

Any Husqvarna approved replacement part used in the performance of any warranty maintenance or repairs on emission-related parts, will be provided without charge to the owner if the part is under warranty.

EMISSION CONTROL WARRANTY PARTS LIST

1Carburetor

2 Spark plug

3 Ignition Module

4 Fuel tank (California only)

MAINTENANCE STATEMENT

The owner is responsible for the performance of all required maintenance, as deﬁned in the operator’s manual.

24 – English

5451546-93 Rev.4 2008-04-16

235, 240 specifications

The Husqvarna 235 and 240 chainsaws are compact, lightweight power tools designed for homeowners and occasional users seeking reliability and performance. Known for their ease of use and versatility, both models are ideal for tasks such as pruning, cutting firewood, and clearing small trees.

One of the main features of the Husqvarna 235 and 240 is their X-Torq engine technology. This innovation reduces fuel consumption by up to 20% while also cutting emissions by approximately 75%. This not only makes the chainsaws environmentally friendly but also saves users on fuel costs over time. The engine's design also enhances torque, providing ample power for cutting through wood efficiently.

Both models come equipped with an inertia-activated chain brake, enhancing safety by preventing unwanted chain movement in case of a kickback. The chain brake is a critical feature for novice users, promoting confidence while operating the chainsaw. This focus on safety extends to the easy-to-reach throttle lockout and combined choke/stop control, allowing for simpler starting procedures.

The Husqvarna 235 and 240 feature an adjustable oil pump, which enables users to control the oil flow to the chain according to their specific needs. This functionality not only prolongs the life of the chain and bar but also helps maintain cutting performance, ensuring smoother operation and reduced wear.

These chainsaws also have ergonomic designs, with comfortable handles that minimize vibrations and allow for prolonged use without fatigue. The lightweight structure makes them easily maneuverable, which is particularly beneficial for tasks that require precision casing or reaching difficult areas.

Another noteworthy characteristic is the Tool-less chain tensioning system. This feature allows users to adjust the chain tension quickly and without the need for additional tools, simplifying maintenance and enhancing user experience.

Overall, the Husqvarna 235 and 240 chainsaws are excellent choices for homeowners seeking reliable, efficient, and easy-to-use tools for light to moderate cutting tasks. With advanced features like X-Torq technology, safety mechanisms, and user-friendly designs, they represent a valuable addition to any gardening or outdoor toolkit.

Husqvarna 240 Federal Emission Control Warranty Statement, Your Warranty Rights and Obligations

Models: 235 240