SAFETY INSTRUCTIONS

1 Undo the bar nuts that hold the clutch cover and chain brake, using the combination spanner. Then tighten the nuts by hand as tight as you can.

2 Raise the tip of the bar and stretch the chain by tightening the chain tensioning screw using the combination spanner. Tighten the chain until it hangs slack on the underside of the bar.

3Use the combination spanner to tighten the bar nuts while lifting the tip of the bar at the same time. Check that you can pull

the chain round freely by hand and that it is not slack on the bottom of the bar.

The position of the chain tensioning screw varies from model to model. See the” What is what” section to find out where it is on your saw.

4Lubricating cutting equipment

!Poor lubrication of cutting equipment may cause the chain to snap and lead to serious, even fatal injuries.

A Chain oil

•Chainsaw chain oil must demonstrate good adhesion to the chain and also maintain its flow caracteristics regardless of whether it is warm summer or cold winter weather.

•As a chainsaw manufacturer we have developed an optimal chain oil which, with its vegetable oil base, is also biodegradable. We recommend the use of our own oil for both maximum chain life and to minimise environmental damage.

•If our own chain oil is not available, standard chain oil is recommended.

•In areas where oil specifically for lubrication of saw chains is unavailable, ordinary EP 90 transmission oil may be used.

•Never use waste oil!

This is dangerous for yourself, the saw and the environment.

BFilling with chain oil

• All our chain saws have an automatic chain lubrication system. On some models the oil flow is also adjustable.

•The sizes of the chain oil tank and fuel tank have been chosen so that the saw will run out of fuel before running out of oil. This means that you should never run with a dry chain.

However, this safety feature requires that you use the right sort of chain oil (if the oil is too thin it will run out before the fuel), and that you adjust the carburetor as recommended (a weak

mixture may mean that the fuel lasts longer than the oil). You should also use the recommended cutting equipment (a bar that is too long will use more chain oil). The above conditions also apply to models with an adjustable oil pump.

14 – English

Page 13 Page 15
Page 14
Image 14
Husqvarna 288XP/XP lite manual Lubricating cutting equipment, Chain oil, Filling with chain oil, Never use waste oil
Page 13 Page 15

288XP/XP lite specifications

The Husqvarna 288XP and XP Lite chainsaws represent a pinnacle in forestry and tree care technology, designed for professionals who demand high performance and reliability in demanding environments. These models are renowned for their robust construction and impressive power-to-weight ratios, making them suitable for a variety of cutting tasks.

One of the standout features of the Husqvarna 288XP is its powerful engine. Equipped with a 75.6 cc two-stroke engine, it delivers a remarkable power output while maintaining efficiency. This ensures that the chainsaw can handle even the most challenging applications, from felling large trees to limbing and bucking with ease. The XP Lite version offers a slightly lighter design, making it more maneuverable while still delivering ample power for professional use.

The chainsaw also incorporates a high-performance air injection system. This unique technology helps to keep the air filter cleaner for longer periods by using centrifugal force to remove larger dust and debris particles before they reach the filter. As a result, users benefit from extended service intervals and less downtime for maintenance, which is crucial in professional settings.

Noise reduction is another important feature of the Husqvarna 288XP series. The saw is equipped with effective vibration damping, reducing fatigue during long operational hours. Additionally, it boasts advanced muffler technologies that help minimize noise levels, allowing operators to work in a variety of environments without disturbing the peace.

Ergonomics play a significant role in the design of these chainsaws. The adjustable chain oil flow ensures optimal lubrication, which improves cutting efficiency and prolongs the life of the chain and bar. The chainsaws also feature an ergonomic handle design, providing comfort and control during use, which is essential for precision cutting.

Safety is paramount in chainsaw design, and the Husqvarna 288XP includes several safety features, such as a chain brake, which activates in the event of kickback, protecting the operator from accidents. The tool-free chain tensioning system allows for quick adjustments on the job, further enhancing user safety and efficiency.

In summary, the Husqvarna 288XP and XP Lite chainsaws are engineered for the professional user who values performance, durability, and safety. With their powerful engines, innovative technologies, ergonomic designs, and commitment to user comfort and safety, these chainsaws are the ideal choice for those working in the most demanding forestry and tree care situations. Whether tackling large-scale projects or precision tasks, the Husqvarna 288XP series is built to meet and exceed expectations.
Top Page Image Contents