Manuals / Husqvarna / Lawn and Garden / Chainsaw

Husqvarna 3120XP manual Transport and storage, Long-term storage, Fuel Handling

Models: 3120XP

1 40

Download 40 pages 33.24 Kb

Page 19

Transport and storage

FUEL HANDLING

Transport and storage

•Always store the chain saw and fuel so that there is no risk of leakages or fumes coming into contact with sparks or naked ﬂames from electrical equipment, electric motors, relays/switches, boilers and the like.

•Always store fuel in an approved container designed for that purpose.

•For longer periods of storage or for transport of the chain saw, the fuel and chain oil tanks should be emptied. Ask where you can dispose of waste fuel and chain oil at your local petrol station.

•The bar guard must always be ﬁtted to the cutting attachment when the machine is being transported or in storage, in order to prevent accident contact with the sharp chain. Even a non-moving chain can cause serious cuts to yourself or persons you bump into with an exposed chain.

•Secure the machine during transport.

Long-term storage

Empty the fuel/oil tanks in a well ventilated area. Store the fuel in approved cans in a safe place. Fit the bar guard. Clean the machine. See instructions under the heading Maintenance schedule.

Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

English – 19

Image 19

Husqvarna 3120XP manual Transport and storage, Long-term storage, Fuel Handling

Contents

Operator′s manual 3120XPEnglish Symbols on the machine KEY TO SYMBOLSSymbols in the operator’s manual CONTENTS CONTENTSContents KEY TO SYMBOLSDear Customer INTRODUCTIONWhat is what on the chain saw? WHAT IS WHAT?modiﬁcations and/or accessories can GENERAL SAFETY PRECAUTIONSBefore using a new chain saw accessories. Non-authorizedPersonal protective equipment Machine′s safety equipmenthappen when the chain touches the defective safety components. SafetyGENERAL SAFETY PRECAUTIONS Will my hand always activate the chain brake during a kickback?symptoms may be increased in cold experience symptoms of overexposureto vibration. Such symptoms include symptoms normally appear in theGeneral rules Stop switchCutting equipment Mufﬂerinjuries Sharpening your chain and adjusting depth gauge settingChain WARNING! Any contact with a rotatingWARNING! Departure from the sharpening instructions considerably min 4 mm 5/32 General advice on adjusting depth gauge settingincreased if the depth gauge setting is Adjustment of depth gauge settingwhich could lead to serious, even fatal Tensioning the chainLubricating cutting equipment WARNING! Poor lubrication of cuttingChecking wear on cutting equipment Checking chain lubricationChain drive sprocket Needle bearing lubricationGENERAL SAFETY PRECAUTIONS working with the chain ASSEMBLYFitting the bar and chain WARNING! Always wear gloves, whenTwo-stroke oil FUEL HANDLINGFuel PetrolExtra chain oil Fuel safetyprecautions, will lessen the risk of ﬁre FuellingLong-term storage Transport and storageFUEL HANDLING Warm engine STARTING AND STOPPINGStarting and stopping Cold engineSTARTING AND STOPPING StoppingGeneral working instructions Basic safety rulesWORKING TECHNIQUES Before useWORKING TECHNIQUES Terms Basic cutting techniqueWARNING! Never use a chain saw by GeneralWORKING TECHNIQUES Tree felling techniqueSafe distance Felling directionWARNING! Unless you have special Clearing the trunk and preparing your retreatFelling cut FellingCutting trees and branches that are in tension General adviceFreeing a tree that has fallen badly Freeing a ”trapped tree”Limbing WARNING! A majority of kickback How to avoid kickbackWhat is kickback? WARNING! Kickback can happen veryFine adjustment MAINTENANCEFunction, Basic settings, Fine adjustment Basic settings and running inHigh speed jet H Checking, maintaining and servicing chain saw safety equipmentCorrectly adjusted carburettor When the bar hits the stump the brake should be appliedThrottle lockout Checking the brake triggerimmediately MAINTENANCEChanging a broken or worn starter cord WARNING! When the recoil spring isMufﬂer StarterMAINTENANCE Tensioning the recoil springChanging a broken recoil spring Fitting the startermust always be replaced Air ﬁlterSpark plug Lubricating the bar tip sprocketMAINTENANCE Adjustment of the oil pumpNeedle bearing lubrication Cooling systemMonthly maintenance Maintenance scheduleDaily maintenance Weekly maintenance3120XP TECHNICAL DATATechnical data WeightSaw chain Guide bar and saw chain combinationsSaw chain ﬁling and ﬁle gauges Guide bar0404/09/2119 EC-declaration of conformityApplies to Europe only EN ISO 121002010, ISO 149822009, EN ISO´z+U2@¶6G¨ ´z+U2@¶6G¨ Original instructions 1153183-26