Husqvarna 323C manual Technical Data, Technical data

TECHNICAL DATA

Technical data

	323L	323C	325Cx
Engine
Cylinder volume, cu.in/cm3	1,50/24,5	1,50/24,5	1,50/24,5
Cylinder bore, inch/mm	1,34/34	1,34/34	1,34/34
Stroke, inch/mm	1,06/27	1,06/27	1,06/27
Idle speed, rpm	2700	2700	2700
Recommended max. speed, rpm	11000-11700	11000-11700	11000-11700
Speed of output shaft, rpm	8014	11700	11700
Max. engine output, acc. to ISO 8893, kW/ r/min	0,9/9000	0,9/9000	0,9/9000
Catalytic converter muffler	Yes (USA)/ No	Yes (USA)/ No	Yes
	(Canada)	(Canada)
Speed-regulated ignition system	No	No	No
Ignition system
Manufacturer/type of ignition system	WalbroMB/SEM	WalbroMB/SEM	WalbroMB/SEM
	AM49	AM49	AM49
Spark plug	Champion RCJ 7Y	Champion RCJ 7Y	Champion RCJ 7Y
Electrode gap, inch/mm	0,02/0,5	0,02/0,5	0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburettor	Zama C1Q	Zama C1Q	Zama C1Q
Fuel tank capacity, US pint/litre	1,06/0,5	1,06/0,5	1,06/0,5
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 9,0/4,1		9,3/4,2	9,3/4,2
Sound levels
(see note 1)
Equivalent sound pressure level at the user′s ear,
measured according to ANSI B175.3-1997, dB(A), min/	91/97	91/98	92/97
max:
Vibration levels
Vibration levels at handles, measured according to ANSI
B175.3-1997, m/s2
At idle, left/right handles, min.:	1,8/1,4	2,7/1,5	2,5/2,1
At idle, left/right handles, max.:	2,8/1,8	3,5/1,7	3,2/2,2
At max. speed, left/right handles, min.:	2,7/5,2	4,0/3,5	4,4/4,2
At max. speed, left/right handles, max.:	7,2/9,8	6,0/9,0	6,2/8,4

Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various

working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.

NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values.

English – 23