TECHNICAL DATA
Technical data | 325Lx | 325LDx | |
Engine |
|
| |
Cylinder volume, cu.in/cm3 | 1,50/24,5 | 1,50/24,5 | |
Cylinder bore, inch/mm | 1,34/34 | 1,34/34 | |
Stroke, inch/mm | 1,06/27 | 1,06/27 | |
Idle speed, rpm | 2700 | 2700 | |
Recommended max. speed, rpm | |||
Speed of output shaft, rpm | 8014 | 8014 | |
Max. engine output, acc. to ISO 8893, kW/ r/min | 0,9/9000 | 0,9/9000 | |
Catalytic converter muffler | Yes | Yes | |
No | Yes | ||
Ignition system |
|
| |
Manufacturer/type of ignition system | WalbroMB/SEM | WalbroMB/SEM | |
AM49 | AM49 | ||
| |||
Spark plug | Champion RCJ 7Y | Champion RCJ 7Y | |
Electrode gap, inch/mm | 0,02/0,5 | 0,02/0,5 | |
Fuel and lubrication system |
|
| |
Manufacturer/type of carburettor | Zama C1Q | Zama C1Q | |
Fuel tank capacity, US pint/litre | 1,06/0,5 | 1,06/0,5 | |
Weight |
|
| |
Weight without fuel, cutting attachment and guard, Lbs/kg 9,0/4,1 | 9,7/4,4 | ||
Sound levels |
|
| |
(see note 1) |
|
| |
Equivalent sound pressure level at the user′s ear, |
|
| |
measured according to ANSI | 92/98 | 90/98 | |
max: |
|
| |
Vibration levels |
|
| |
Vibration levels at handles, measured according to ANSI |
|
| |
|
| ||
At idle, left/right handles, min.: | 1,5/1,4 | 1,5/1,4 | |
At idle, left/right handles, max.: | 2,0/1,8 | 2,4/2,2 | |
At max. speed, left/right handles, min.: | 2,5/4,8 | 2,5/4,8 | |
At max. speed, left/right handles, max.: | 4,9/8,0 | 5,8/7,6 | |
Note 1: Equivalent noise pressure level is calculated as the
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values.
24 – English
