ASSEMBLY

Fitting the J-handle

•Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaft.

•Slide the spacer into the slot in the loop handle.

•Fit the nut, knob and screw. Do not overtighten.

•Attach the J-handle to the loop handle using the three screws, as shown.

•Now adjust the trimmer to give a comfortable working position. Tighten the bolt/knob.

WARNING! Only grass blades/grass cutters

!or trimmer heads/plastic blades may be used when the J-handle is fitted. Saw blades must never be used with the J-handle.

Fitting blades and trimmer heads

When fitting the cutting attachment it is extremely important that the raised section on the drive disc/support flange engages correctly in the centre hole of the cutting attachment. If the cutting attachment is fitted incorrectly it can result in serious and/or fatal personal injury.

WARNING! Never use a cutting attachment

!without an approved guard. See the chapter on Technical data. If an incorrect or faulty guard is fitted this can cause serious personal injury.

Fitting a trimmer guard and Superauto II 1" trimmer head

 

 

K

K

G

 

F

B

 

I

J

I

C

 

 

 

 

A

•Fit the correct trimmer guard (A) for use with the trimmer head. Hook the guard onto the fitting on the shaft and secure it with the bolt (L).

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•To fit the trimmer head, first separate the two halves (see diagram). Proceed as follows:

•Insert a finger into the centre hole of the cover (I) while grasping the cover with your other fingers. Using the index finger and thumb of your other hand, release the two catches (J) that engage in the cut-outs in the bottom half

(K). Pull apart the trimmer head, grasping the cover firmly.

•Place the cover (I) and the support flange (F) on the output shaft.

•Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit. Hold the shaft of the spanner as close to the blade guard as possible. To tighten the nut, turn the spanner in the opposite direction to the direction of rotation (Caution! left-hand thread).

•Fit the bottom half of the trimmer head (K) to the cover (I) by pressing them together, with the cut-outs on the bottom half aligned with the catches on the cover.

•To dismantle, follow the instructions in the reverse order.

English – 11

Page 10 Page 12
Page 11
Image 11
Husqvarna 323RJ manual Assembly, Fitting the J-handle, Fitting blades and trimmer heads
Page 10 Page 12

323RJ specifications

The Husqvarna 323RJ is a versatile and efficient product designed for landscape professionals and homeowners alike. Renowned for its reliability and cutting performance, this trimmer is an excellent choice for tackling a variety of gardening tasks.

One of the standout features of the Husqvarna 323RJ is its powerful, lightweight engine. The 1.6 hp, 25 cc, 2-stroke engine delivers robust performance while maintaining excellent fuel efficiency. This ensures extended working times without the need for frequent refueling, making it a convenient choice for large areas.

A key technology integrated into the Husqvarna 323RJ is the Smart Start system. This innovative feature allows for easier start-up with minimal effort, reducing the resistance in the starter cord by up to 40%. This means that users can get to work quickly and efficiently, avoiding the frustration of difficult starts.

The machine is also designed with a low vibration system, significantly reducing operator fatigue during extended usage. This system utilizes a combination of anti-vibration dampeners and ergonomic design principles, ensuring that the user can work comfortably without excessive vibration-related stress.

The trimmer head is equipped with a Tap 'n Go feature, allowing users to easily release new line with a simple tap on the ground while mowing. This feature eliminates the need to stop work to manually adjust the line, streamlining the trimming process and improving overall efficiency.

The Husqvarna 323RJ incorporates a convenient adjustable handle that allows users to set the angle to their preference, ensuring comfortable operation regardless of height or reach. Additionally, the unit is equipped with a dual line cutting system, providing a wide cutting swath that enhances productivity.

Durability is a hallmark of the Husqvarna brand, and the 323RJ is no exception. Constructed with high-quality materials and built to withstand the rigors of frequent use, this trimmer is designed for longevity.

In summary, the Husqvarna 323RJ is ideal for those seeking a reliable, efficient, and comfortable trimmer. With features such as a lightweight and powerful engine, Smart Start technology, low vibration system, Tap 'n Go line release, and adjustable handle, it stands out as a top choice for anyone looking to maintain their garden effectively. Whether for professional landscaping or personal use, it promises to deliver exceptional performance and ease of use.
Top Page Image Contents