GENERAL SAFETY PRECAUTIONS

Locking nut

A locking nut is used to secure some types of cutting attachment.

When fitting, tighten the nut in the opposite direction to the direction of rotation of the cutting attachment. To remove it, undo the nut in the same direction as the cutting attachment rotates. (CAUTION! The nut has a left-hand thread.)

When loosening and tightening the saw blade nut, there is a risk of injury from the teeth of the saw blade. You should therefore always ensure that your hand is shielded by the blade guard when doing this. Always use a socket spanner with a shaft that is long enough to allow this. The arrow in the diagram shows the area where you should operate the socket spanner when loosening or tightening the nut.

The nylon lining inside the locking nut must not be so worn that you can turn it by hand. The lining should offer a resistance of at least 1.5 Nm. The nut should be replaced after it has been put on approx. 10 times.

Cutting equipment

This section describes how to choose and maintain your cutting equipment in order to:

Reduce the risk of blade thrust.

Obtain maximum cutting performance.

Extend the life of cutting equipment.

IMPORTANT!

Only use cutting attachments with the guards we recommend! See the chapter on Technical data.

Refer to the instructions for the cutting attachment to check the correct way to load the cord and the correct cord diameter.

Keep the teeth of the blade correctly sharpened! Follow our recommendations. Also refer to the instructions on the blade packaging.

WARNING! Always stop the engine before

!doing any work on the cutting attachment. This continues to rotate even after the throttle has been released. Ensure that the cutting attachment has stopped completely and disconnect the HT lead from the spark plug before you start to work on it.

WARNING! Using an incorrect cutting

!attachment or an incorrectly sharpened blade increases the risk of kickback.

Cutting equipment

Grass blades and grass cutters are intended for cutting coarse grass.

A trimmer head is intended for trimming grass.

General rules

Only use cutting attachments with the guards we recommend! See the chapter on Technical data.

Keep the teeth of the blade correctly sharpened! Follow our instructions and use the recommended file gauge. An incorrectly sharpened or damaged blade increases the risk of accidents.

Check the cutting attachment for damage or cracks. A damaged cutting attachment should always be replaced.

English – 9

Page 9
Image 9
Husqvarna 323RJ manual Cutting equipment, Locking nut

323RJ specifications

The Husqvarna 323RJ is a versatile and efficient product designed for landscape professionals and homeowners alike. Renowned for its reliability and cutting performance, this trimmer is an excellent choice for tackling a variety of gardening tasks.

One of the standout features of the Husqvarna 323RJ is its powerful, lightweight engine. The 1.6 hp, 25 cc, 2-stroke engine delivers robust performance while maintaining excellent fuel efficiency. This ensures extended working times without the need for frequent refueling, making it a convenient choice for large areas.

A key technology integrated into the Husqvarna 323RJ is the Smart Start system. This innovative feature allows for easier start-up with minimal effort, reducing the resistance in the starter cord by up to 40%. This means that users can get to work quickly and efficiently, avoiding the frustration of difficult starts.

The machine is also designed with a low vibration system, significantly reducing operator fatigue during extended usage. This system utilizes a combination of anti-vibration dampeners and ergonomic design principles, ensuring that the user can work comfortably without excessive vibration-related stress.

The trimmer head is equipped with a Tap 'n Go feature, allowing users to easily release new line with a simple tap on the ground while mowing. This feature eliminates the need to stop work to manually adjust the line, streamlining the trimming process and improving overall efficiency.

The Husqvarna 323RJ incorporates a convenient adjustable handle that allows users to set the angle to their preference, ensuring comfortable operation regardless of height or reach. Additionally, the unit is equipped with a dual line cutting system, providing a wide cutting swath that enhances productivity.

Durability is a hallmark of the Husqvarna brand, and the 323RJ is no exception. Constructed with high-quality materials and built to withstand the rigors of frequent use, this trimmer is designed for longevity.

In summary, the Husqvarna 323RJ is ideal for those seeking a reliable, efficient, and comfortable trimmer. With features such as a lightweight and powerful engine, Smart Start technology, low vibration system, Tap 'n Go line release, and adjustable handle, it stands out as a top choice for anyone looking to maintain their garden effectively. Whether for professional landscaping or personal use, it promises to deliver exceptional performance and ease of use.