MAINTENANCE

Bevel gear

The bevel gear is filled with the right quantity of grease at the factory. However, before using the machine you should check that the bevel gear is filled three-quarters full with grease. Use HUSQVARNA special grease.

The grease in the bevel gear does not normally need to be changed except if repairs are carried out.

CAUTION! Use only HUSQVARNA replacement parts. Use of other brands of replacement parts can cause damage to your unit or injury to the operator or others. Your warranty does not cover damage or liability caused by the use of accessories and/or attachments not specifically recommended by HUSQVARNA.

Maintenance schedule

Below you will find some general maintenance instructions. If you need further information please contact your service workshop.

Daily maintenance

Check throttle trigger and throttle trigger lockout function.

Check that the stop switch works correctly.

Check that the blades do not move when the engine is idling.

Clean the outside of the machine.

Check that the harness is not damaged.

Check that the guard is undamaged and not cracked. Replace the guard if it has been exposed to impact or is cracked.

Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been exposed to impact or are cracked.

A non-balanced blade/trimmer head induces heavy vibrations that may damage the machine.

Check that the blade nut is sufficiently tightened.

Check that nuts and screws are tight.

Check that the screws that hold the bevel gear are tight.

Check that there are no fuel leaks from the engine, tank or fuel lines.

Weekly maintenance

Check the starter and starter cord.

Clean the carburettor area.

Clean the outside of the spark plug. Remove it and check the electrode gap. Adjust the gap to 0.5 mm (.20”), or replace the spark plug. Check that the spark plug is fitted with a suppressor.

Clean the cooling fins on the cylinder and check that the air intake near the starter is not blocked.

Check that the bevel gear is filled with grease up to 3/4. Use special grease.

Clean the air filter.

Monthly maintenance

Clean the fuel tank.

Clean the outside of the carburettor and the space around it.

Clean the fan and the area around it.

Check fuel hose for cracks or other damage. Change if necessary.

Change the fuel filter in fuel tank.

Check the clutch, clutch springs and the clutch drum for wear. Replace if necessary.

Check electrical wires and connections.

Replace the spark plug. Check that the spark plug is fitted with a suppressor.

Change the air filter.

Check and clean the spark arrestor mesh on the muffler (only applies to mufflers fitted with a catalytic converter).

22 – English

Page 22
Image 22
Husqvarna 323RJ, 325RJX-Series manual Bevel gear, Maintenance schedule, Daily maintenance, Weekly maintenance

323RJ, 325RJX-Series specifications

The Husqvarna 323RJ and 325RJX-Series are premier tools in the realm of multi-purpose trimming and landscaping equipment, crafted for both the professional landscaping user and the passionate homeowner. Renowned for their ergonomic design and advanced technology, these models stand out for their performance, efficiency, and innovation.

One of the key features of the Husqvarna 323RJ and 325RJX is their lightweight construction. Weighing significantly less than traditional trimmers, these tools provide users with the ability to work for extended periods without experiencing fatigue. This is especially beneficial for professionals who manage large landscapes and need to maintain productivity throughout the day.

Equipped with Husqvarna's powerful motors, the 323RJ and 325RJX deliver impressive power-to-weight ratios, allowing them to handle even the toughest jobs with ease. The 325RJX, in particular, is designed with a robust engine that ensures high efficiency while minimizing emissions, making it an environmentally conscious option. This aligns with the increasing demand for sustainable landscaping equipment.

The design of these models features an adjustable shaft, enabling users to customize their reach and comfort while eliminating strain on the user's arms and back. The unique angled head allows for easy trimming around obstacles, ensuring that even the most challenging areas can be maintained with precision.

In terms of technology, the Husqvarna 323RJ and 325RJX incorporate Smart Start and fuel pump features that make starting the engine incredibly easy. Users benefit from reduced resistance in the starter cord, translating to fewer pulls to get the equipment running smoothly. This is a significant advantage, particularly when long periods of inactivity might occur during a project.

Additionally, both models are equipped with dual-line tap-and-go cutting systems, promoting efficient weed trimming and allowing users to quickly release more line as needed, enhancing productivity. The ergonomic handles provide a comfortable grip, and features such as the anti-vibration system minimize fatigue, a critical aspect for prolonged use.

Overall, the Husqvarna 323RJ and 325RJX-Series represent the forefront of trimming technology. With their blend of lightweight design, powerful performance, comfort features, and eco-friendly operation, these tools are essential for any serious landscaper looking to achieve remarkable results with efficiency and ease.