Manuals / Husqvarna / Lawn and Garden / Brush Cutter

Husqvarna 323RJ, 325RJX-Series Assembly, Fitting the J-handle, Fitting blades and trimmer heads

Models: 323RJ, 325RJX-Series

1 36
Download 36 pages 22.85 Kb
Page 13
Image 13

ASSEMBLY

Fitting the J-handle

•Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaft.

•Slide the spacer into the slot in the loop handle.

•Fit the nut, knob and screw. Do not overtighten.

•Attach the J-handle to the loop handle using the three screws, as shown.

•Now adjust the trimmer to give a comfortable working position. Tighten the bolt/knob.

WARNING! Only grass blades/grass cutters

!or trimmer heads/plastic blades may be used when the J-handle is fitted. Saw blades must never be used with the J-handle.

Fitting blades and trimmer heads

When fitting the cutting attachment it is extremely important that the raised section on the drive disc/support flange engages correctly in the centre hole of the cutting attachment. If the cutting attachment is fitted incorrectly it can result in serious and/or fatal personal injury.

WARNING! Never use a cutting attachment

!without an approved guard. See the chapter on Technical data. If an incorrect or faulty guard is fitted this can cause serious personal injury.

Fitting a trimmer guard and Superauto II 1" trimmer head

 

 

K

K

G

 

F

B

 

I

J

I

C

 

 

 

 

A

•Fit the correct trimmer guard (A) for use with the trimmer head. Hook the guard onto the fitting on the shaft and secure it with the bolt (L).

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•To fit the trimmer head, first separate the two halves (see diagram). Proceed as follows:

•Insert a finger into the centre hole of the cover (I) while grasping the cover with your other fingers. Using the index finger and thumb of your other hand, release the two catches (J) that engage in the cut-outs in the bottom half

(K). Pull apart the trimmer head, grasping the cover firmly.

•Place the cover (I) and the support flange (F) on the output shaft.

•Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit. Hold the shaft of the spanner as close to the blade guard as possible. To tighten the nut, turn the spanner in the opposite direction to the direction of rotation (Caution! left-hand thread).

•Fit the bottom half of the trimmer head (K) to the cover (I) by pressing them together, with the cut-outs on the bottom half aligned with the catches on the cover.

•To dismantle, follow the instructions in the reverse order.

English – 13

Page 12 Page 14
Page 13
Image 13
Husqvarna 323RJ, 325RJX-Series manual Assembly, Fitting the J-handle, Fitting blades and trimmer heads
Page 12 Page 14

323RJ, 325RJX-Series specifications

The Husqvarna 323RJ and 325RJX-Series are premier tools in the realm of multi-purpose trimming and landscaping equipment, crafted for both the professional landscaping user and the passionate homeowner. Renowned for their ergonomic design and advanced technology, these models stand out for their performance, efficiency, and innovation.

One of the key features of the Husqvarna 323RJ and 325RJX is their lightweight construction. Weighing significantly less than traditional trimmers, these tools provide users with the ability to work for extended periods without experiencing fatigue. This is especially beneficial for professionals who manage large landscapes and need to maintain productivity throughout the day.

Equipped with Husqvarna's powerful motors, the 323RJ and 325RJX deliver impressive power-to-weight ratios, allowing them to handle even the toughest jobs with ease. The 325RJX, in particular, is designed with a robust engine that ensures high efficiency while minimizing emissions, making it an environmentally conscious option. This aligns with the increasing demand for sustainable landscaping equipment.

The design of these models features an adjustable shaft, enabling users to customize their reach and comfort while eliminating strain on the user's arms and back. The unique angled head allows for easy trimming around obstacles, ensuring that even the most challenging areas can be maintained with precision.

In terms of technology, the Husqvarna 323RJ and 325RJX incorporate Smart Start and fuel pump features that make starting the engine incredibly easy. Users benefit from reduced resistance in the starter cord, translating to fewer pulls to get the equipment running smoothly. This is a significant advantage, particularly when long periods of inactivity might occur during a project.

Additionally, both models are equipped with dual-line tap-and-go cutting systems, promoting efficient weed trimming and allowing users to quickly release more line as needed, enhancing productivity. The ergonomic handles provide a comfortable grip, and features such as the anti-vibration system minimize fatigue, a critical aspect for prolonged use.

Overall, the Husqvarna 323RJ and 325RJX-Series represent the forefront of trimming technology. With their blend of lightweight design, powerful performance, comfort features, and eco-friendly operation, these tools are essential for any serious landscaper looking to achieve remarkable results with efficiency and ease.