VHX SERIES STEAMERS - REMOVAL AND REPLACEMENT OF PARTS

Handle

1.Open the door.

2.Remove screws from the top and bottom of the door.

3.Pull the inner door panel out from the door housing with the gasket plate and gasket still attached.

NOTE: When installing the spacers, the smaller diameter fits into the slot in the door and the latch lever must rest on top of the handle latch screw.

5.Reverse procedure to install.

Latch Assembly

1.Open the door.

2.Remove screws from the top and bottom of the door.

3.Pull the inner door panel out from the door housing with the gasket plate and gasket still attached.

4.Remove the screws from the side edge of the door that secure the latch mechanism and remove the latch from the door.

NOTE: When installing, the latch lever must rest on top of the handle latch screw.

5. Reverse procedure to install.

4.Remove the nuts and spacers from the handle screws and remove the handle from the door.

F24700 (October 2001)

 

Page 22 of 68

 

Page 22
Image 22
Vulcan-Hart MHB24G, VHX24G5 manual Handle, Latch Assembly