Husqvarna 324RX manual Contents, Note the following before starting

CONTENTS

Contents
KEY TO SYMBOLS
Symbols	2
CONTENTS
Contents	3
Note the following before starting:	3
INTRODUCTION
Dear customer!	4
WHAT IS WHAT?
What is what on the clearing saw?	5
GENERAL SAFETY PRECAUTIONS
Important	6
Personal protective equipment	6
Machine′s safety equipment	7
Cutting equipment	10
ASSEMBLY
Fitting the handlebar	13
Transport position, handlebar	13
Assembling the cutting equipment	14
Fitting a blade guard, grass blade and grass cutter ..	14
Fitting the blade guard and saw blade	14
Fitting a trimmer guard and Superauto II 1" trimmer
head	15
Fitting other guards and cutting attachments	16
Adjusting the harness and clearing saw	16
Standard harness	16
FUEL HANDLING
Fuel handling	18
Fuel	18
STARTING AND STOPPING
Check before starting	20
Starting and stopping	20
WORKING TECHNIQUES
General working instructions	22
MAINTENANCE
Carburetor	27
Muffler	27
Cooling system	28
Spark plug	28
Air filter	28
Maintenance schedule	30
TECHNICAL DATA
Technical data	31
FEDERAL EMISSION CONTROL WARRANTY
STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS ... 33

Note the following before starting:

Please read the operator’s manual carefully.

Maintenance, replacement, or repair of the emission control devices and system may be performed by any nonroad engine repair establishment or individual.

WARNING! Long-term exposure to noise

! can result in permanent hearing impairment. So always use approved hearing protection.

WARNING! Under no circumstances may

! the design of the machine be modified without the permission of the manufacturer. Always use genuine accessories. Non- authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others.

Your warranty may not cover damage or liability caused by the use of non- authorized accessories or replacement parts.

WARNING! A clearing saw, brushcutter or

! trimmer can be dangerous if used incorrectly or carelessly, and can cause serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of this operator’s manual.

This engine label certifies that the product is certified in accordance with American exhaust emissions requirements EPA Ph II and CARB Tier II. The Emissions Compliance Period referred to on the emissions Compliance label indicates the number of operating hours for which the engine has been shown to meet Federal and California emisson requirements.

Category C = 50 hours, B = 125 hours, and A = 300 hours.

The engine exhaust from this product contains chemical known to the State of California to cause cancer, birth defects or other reproductive harm.

English – 3