SAFETY INSTRUCTIONS

Assembly of the catcher (accessory)

Loosen the nuts on top of the bar. Align the bolts in the holes on the catcher and fit the bolts. Adjust the blades' contact pressure according to the instructions under the heading Blades

Gear housing

The gear housing gets hot when the machine has been in use. To avoid burning yourself do not touch the gear housing.

General safety precautions

IMPORTANT! The machine is only designed for cutting branches and twigs.

Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your co-ordination.

Wear personal protective equipment. See instructions under the heading Personal protective equipment.

Never use a machine that has been modified in any way from its original specification.

Never use the machine in extreme weather conditions such as severe cold, very hot and/or humid climates.

Never use a machine that is faulty. Carry out the checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance.

All covers and guards must be fitted before starting. Make sure the spark plug cap and HT lead are not damaged. Otherwise you could get an electric shock.

WARNING! Faulty blades can increase the

!risk of accidents.

Starting

The gear housing and clutch drum must be fitted before the machine is started, otherwise the clutch can come loose and cause personal injury.

Never start the machine indoors. Exhaust fumes can be dangerous if inhaled.

Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment.

Place the machine on the ground, ensure the cutting attachment is clear of twigs and stones. Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot). Then grip the starter handle with your right hand and pull the starter cord.

Fuel safety

Always use a fuel container with an anti-spill valve.

Never refuel the machine while the engine is running. Always stop the engine and let it cool for a few minutes before refuelling.

Make sure there is plenty of ventilation when refuelling or mixing fuel (petrol and 2-stroke oil).

Move the machine at least 3 m from the refuelling point before starting it.

Never start the machine:

-If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

-If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

-If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

-Avoid all skin contact with fuel. Fuel is a skin irritant and may even cause skin changes.

English – 7

Page 7
Image 7
Husqvarna 325HS75X General safety precautions, Assembly of the catcher accessory, Gear housing, Starting, Fuel safety

325HS75X, 325HS99X specifications

The Husqvarna 325HS99X and 325HS75X are two remarkable hedge trimmers designed for both professional landscapers and gardening enthusiasts. These models combine power, precision, and comfort, making them ideal for tackling a variety of hedging tasks.

The 325HS99X features a powerful 25.4 cc engine that delivers high performance while remaining fuel-efficient. With its long 39-inch cutting blade, operators can trim large hedges more efficiently, reducing the time spent on the job. The trimmer is equipped with a double-sided blade that cuts smoothly in both directions, allowing for faster work and cleaner cuts. This model also boasts an adjustable rear handle which can be rotated to optimize comfort during various cutting angles.

On the other hand, the 325HS75X features a slightly smaller 24.5 cc engine. Although it provides slightly lower power, it is still competent for a range of trimming tasks. The 30-inch cutting blade enables users to tackle moderate-sized hedges with ease. Like its counterpart, the 325HS75X also has a double-sided blade design, ensuring efficient operation and clean results.

Both models come equipped with Husqvarna's Anti-Vibration technology, which minimizes fatigue during prolonged use. This feature is crucial for professionals who need to use the trimmer for extended periods. Additionally, the ergonomic design of both models enhances user comfort, helping to ensure that operators maintain control even during extended sessions.

Moreover, starting these hedge trimmers is made easier thanks to Husqvarna's Smart Start technology. This system reduces the amount of effort needed to start the engine, ensuring that the trimmers are ready for action without unnecessary hassle. The air filtration system in both models helps prolong the life of the engine by keeping contaminants at bay, reducing maintenance and ensuring reliable operation over time.

In summary, the Husqvarna 325HS99X and 325HS75X hedge trimmers exemplify advanced engineering and design, making them indispensable tools for anyone serious about hedge trimming. With robust power, long blades for efficiency, and innovative features for user comfort, these hedge trimmers are built to handle the demands of both professional and household gardening tasks. Whether you're trimming dense shrubs or shaping hedges, the 325HS99X and 325HS75X offer reliability and performance that gardeners can depend on.