Husqvarna 325 L XT-Series, 325C, 322 L Technical Data, Technical data 322L/323L, 325LXT 325LDX

TECHNICAL DATA

Technical data	322L/323L
Engine
Displacement, cu. in/cm3	1,50/24,5
Cylinder bore, inch/mm	1,34/34
Stroke length, inch/mm	1,06/27
Recommended max. speed, rpm	11 000 - 11 700
Idling speed, rpm	2 700
Speed of output shaft, rpm	8 014
Max. engine output, acc. to ISO 8893,
kW/rpm	0,9/ 9 000
Catalytic converter muffler	No
Speed-regulated ignition system	No
Ignition system
Manufacturer/type of ignition system	Walbro MB 20
Spark plug	Champion RCJ 7Y
Electrode gap, inch/mm	0,02/0,5
Fuel lubrication system
Manufacturer/type of carburetor	Zama C1Q
Fuel tank capacity, US pint/litres	1,06/0,5
Weight
Weight without fuel, cutting tool and
guard, Lbs/kg	9,0/4,1
Sound levels (se note 1)
Equivalent sound pressure level at the user’s
ear, measured according to ANSI B175.3-
1997, dB(A), min/max:	91/97
Vibration levels
Vibration levels on the handles, measured
according to ANSI B175.3-1997, m/s2
When idling, left/right handles, min:	1,8/1,4
When idling, left/right handles, max:	2,8/1,8
At max. speed, left/right handles, min:	2,7/5,2
At max. speed, left/right handles, max:	7,2/9,8

325LX

1,50/24,5

1,34/34

1,06/27

11 000 - 11 700

2700

8014

0,9/ 9 000 Yes

No

Walbro MB 20 Champion RCJ 7Y 0,02/0,5

Zama C1Q 1,06/0,5

9,0/4,1

92/98

1,5/1,4

2,0/1,8

2,5/4,8

4,9/8,0

325LXT	325LDX
1,50/24,5	1,50/24,5
1,34/34	1,34/34
1,06/27	1,06/27
11 000 - 11 700	10 000 - 10 500
2 700	2 700
8 014	8 014
0,9/ 9 000	0,9/ 9 000
Yes	No
No	Yes
Walbro MB 20	Walbro MB 28
Champion RCJ 7Y	Champion RCJ 7Y
0,02/0,5	0,02/0,5
Zama C1Q	Zama C1Q
1,06/0,5	1,06/0,5
9,7/4,4	9,7/4,4
90/98	90/98
1,5/1,4	1,5/1,4
2,4/2,2	2,4/2,2
2,5/4,8	2,5/4,8
5,8/7,6	5,8/7,6

Note 1: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various

working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.

NOTE! Sound pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values.

English – 21