Husqvarna 325P5X manual KEY to Symbols

KEY TO SYMBOLS

Symbols

WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

•A protective helmet where there is a risk of

falling objects

• Approved hearing protection

•Protective goggles or a visor

This product is in accordance with applicable

EC directives.

This machine is not electrically insulated. If the machine touches or comes close to high-voltage power lines it could lead to

death or serious bodily injury. Electricity can jump from one point to another by arcing. The higher the voltage, the greater

the distance electricity can jump. Electricity can also travel through branches and other objects, especially if

they are wet. Always keep a distance of at least 10 m between the machine and high-voltage power lines and/or any objects that are touching them. If have to work within this safe distance you should always contact the relevant power company to make sure the power is switched off before you start work.

This machine has a long reach. Make sure that no people or animals come closer than 15 m when the machine is running.

Always wear approved protective gloves.

Wear sturdy, non-slip boots.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

The engine is switched off by moving the stop

switch to the stop position. CAUTION! The stop switch automatically returns to the start position. In order to prevent unintentional starting, the spark plug cap must be removed

from the spark plug when assembling, checking and/or performing maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be worn.

Filling with chain oil and adjusting oil flow

2 – English