Manuals / Brands / Lawn and Garden / Brush Cutter / Husqvarna / Lawn and Garden / Brush Cutter

Husqvarna 326C, 326L, 326LS, 326LX-Series, 326LDX-Series, 326C, 326LDX, 326Lx Fitting the trimmer guard and trimmer head

1 40

Download 40 pages, 1.66 Mb

12 –

English

ASSEMBLY

Fitting the trimmer guard and trimmer head

(326C)

Guard

• Fit the guard as shown in the diagram. Tighten securely.

Trimmer head

• Fit the dust cup on the shaft. The nut must be completely

covered by the dust cup.

• Hold the dust cup with a spanner to prevent the shaft from

rotating.

• Screw the trimmer head onto the shaft.

Contents

Main KEY TO SYMBOLS Symbols CONTENTS Contents Note the following before starting: INTRODUCTION Dear customer! WHAT IS WHAT? What is what? Important Personal protective equipment s safety equipment Machine Throttle lock Cutting attachment guard Stop switch Vibration damping system Mufer Locking nut Cutting equipment Trimmer head Fitting the loop handle Dismantling: Assembly: Fitting the loop handle Fitting the trimmer head Fitting a trimmer guard and Superauto II 1" trimmer head Fitting other guards and cutting attachments Fitting the trimmer guard and trimmer head Guard Trimmer head FUEL HANDLING Fuel safety Transport and storage Fuel Gasoline FUEL HANDLING Mixing Fueling STARTING AND STOPPING Check before starting Starting and stopping Starting STARTING AND STOPPING Stopping WORKING TECHNIQUES General working instructions Basic safety rules Basic working techniques Grass trimming with a trimmer head WORKING TECHNIQUES Clearing Cutting Sweeping Carburetor Function Basic setting Fine adjustment Conditions Mufer Cooling system Spark plug Two-piece shaft Air lter Cleaning the air lter Oiling the air lter Bevel gear Maintenance schedule TECHNICAL DATA Technical data TECHNICAL DATA 26 FEDERAL EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS MANUFACTURERS WARRANTY COVERAGE OWNERS WARRANTY RESPONSIBILITIES WARRANTY COMMENCEMENT DATE Page Trimmy VII