FEDERAL AND CALIFORNIA EMISSION CONTROLWARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND

OBLIGATIONS

The EPA (U.S. Environmental Protection Agency), CARB (California Air Resources Board) and Husqvarna Forest & Garden are pleased to explain the emissions control system warranty on your 2001 and later small off-road engine. In U.S., new small off-road engines must be designed, built and equipped to meet the federal or California stringent anti-smog standards. Husqvarna Forest & Garden must warrant the emission control system on your small off-road engine for the periods of time listed below provided there has been no abuse, neglect or improper maintenance of your small offroad engine. Your emission control system includes Parts such as the carburetor and the ignition system.

Where a warrantable condition exists, Husqvarna Forest & Garden will repair your small off-road engine at no cost to you including diagnosis, parts and labor.

MANUFACTURER’S WARRANTY COVERAGE

The 2001 and later small off-road engines are warranted for two years. If any emission related part on your engine is defective, the part will be repaired or replaced by Husqvarna Forest & Garden.

OWNER’S WARRANTY

RESPONSIBILITIES

As the small off-road engine owner, you are responsible for the performance of the required maintenance listed in your Owner’s Manual. Husqvarna Forest & Garden recommends that you retain all receipts covering maintenance on your small off-road engine, but Husqvarna Forest & Garden cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance.

As the small off-road engine owner, you should, however, be aware that Husqvarna Forest & Garden may deny you warranty coverage if your small off-road engine or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications.

You are responsible for presenting your small off-road engine to a Husqvarna Forest & Garden authorized servicing dealer as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days.

If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Husqvarna Forest & Garden at 1-800- 487-5963.

WARRANTY COMMENCEMENT DATE

The warranty period begins on the date small off-road engine is delivered.

LENGTH OF COVERAGE

Husqvarna Forest & Garden warrants to the initial owner and each subsequent purchaser that the engine is free from defects in materials and workmanship which cause the failure of a warranted part for a period of two years.

WHAT IS COVERED

REPAIR OR REPLACEMENT OF PARTS

Repair or replacement of any warranted part will be performed at no charge to the owner at an approved Husqvarna Forest & Garden servicing dealer.

If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Husqvarna Forest & Garden at 1-800- 487-5963.

WARRANTY PERIOD

Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled only for regular inspection to the effect of ”repair or replace as necessary” shall be warranted for 2 years. Any warranted part which is scheduled for replacement as required maintenance shall be warranted for the period of time up to the first scheduled replacement point for that part.

DIAGNOSIS

The owner shall not be charged for diagnostic labor which leads to the determination that a warranted part is defective, if the diagnostic work is performed at an approved Husqvarna Forest & Garden servicing dealer.

CONSEQUENTIAL DAMAGES

Husqvarna Forest & Garden may be liable for damages to other engine components caused by the failure of a warranted part still under warranty.

WHAT IS NOT COVERED

All failures caused by abuse, neglect or improper maintenance are not covered.

ADD -ON OR MODIFIED PARTS

The use of add-on or modified parts can be grounds for disallowing a warranty claim. Husqvarna Forest & Garden is not liable to cover failures of warranted parts caused by the use of add-on or modified parts.

HOW TO FILE A CLAIM

If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Husqvarna Forest & Garden at 1-800- 487-5963.

WHERE TO GET WARRANTY SERVICE

Warranty services or repairs shall be provided at all Husqvarna Forest & Garden authorized servicing dealers.

MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS

Any Husqvarna Forest & Garden approved replacement part used in the performance of any warranty maintenance or repairs on emission-related parts, will be provided without charge to the owner if the part is under warranty.

EMISSION CONTROL WARRANTY PARTS LIST

1.Carburetor and internal parts

2.Intake pipe, airfilter holder and carburetor bolts.

3.Airfilter and fuelfilter covered up to maintainance schedule.

4.Ignition System

a)Spark Plug, covered up to maintenance schedule

b)Ignition Module

5.Muffler with catalytic converter

MAINTENANCE STATEMENT

The owner is responsible for the performance of all required maintenance, as defined in the operator’s manual.

English – 19

Page 18 Page 20
Page 19
Image 19
Husqvarna 326HD60, 326HD75 manual Federal and California Emission Controlwarranty Statement
Page 18 Page 20

326HD60, 326HD75 specifications

The Husqvarna 326HD75 and 326HD60 are advanced hedge trimmers designed for professional landscapers and homeowners seeking high performance and reliability. Both models excel in providing exceptional cutting capabilities while ensuring user comfort and ease of operation, making them standout choices in the market.

The Husqvarna 326HD75 model is known for its impressive 75 cm cutting bar, which allows users to tackle larger hedges and shrubs with ease. Its powerful 25.4 cc X-Torq engine ensures efficient fuel consumption while delivering strong cutting performance. The lightweight design of the trimmer, weighing just 5.3 kg, minimizes user fatigue, allowing for extended periods of use without discomfort.

On the other hand, the Husqvarna 326HD60 features a slightly shorter 60 cm cutting bar, which is ideal for maintaining smaller hedges and detailing work. This model also utilizes the X-Torq engine technology, providing a mix of power and fuel efficiency. With an ergonomic design, the 326HD60 ensures that operators can handle precision tasks effectively.

Both models are equipped with adjustable handles, allowing for better maneuverability and control during cutting tasks. This feature is vital when working in tight spaces or on uneven terrain. Moreover, the double-sided cutting blades provide increased productivity by allowing the user to cut from multiple angles without repositioning the tool. This results in a cleaner, more precise cut and a professional finish.

The Husqvarna 326HD75 and 326HD60 also incorporate a robust anti-vibration system that significantly reduces vibration levels, enhancing user comfort during extended use. This technology not only improves the overall experience for the operator but also contributes to increased accuracy and control when trimming.

Additionally, these trimmers are designed with a low noise engine, making them suitable for residential areas where noise restrictions may apply. The ease of maintenance, including the readily accessible air filter and easy-to-replace spark plug, ensures that both models provide longevity and reliability.

In summary, the Husqvarna 326HD75 and 326HD60 hedge trimmers offer a perfect blend of power, efficiency, and ergonomic design. With their advanced features and technologies, they are ideal choices for anyone looking to achieve exceptional results in their landscaping projects while maintaining user comfort and reducing fatigue. Whether for professional or home use, these trimmers deliver top-tier performance and utility.
Top Page Image Contents