START AND STOP

Control before starting

•Inspect the working area. Remove objects that can be thrown.

• Check the blades. Never use blades that are dull, cracked or damaged.

•Check that the hedge trimmer is in full working order. Check that all nuts and bolts are tightened correctly.

•Make sure the gearbox is lubricated correctly. See the section ”Maintenance”.

•Ensure the blades always stop when the engine is idling.

•Only use the machine for what it is intended for.

•Ensure that the handle and safety functions are in order. Never use a machine that lacks a part or has been modified outside of the specifications.

Start and stop

Start

Warm engine

IGNITION:

Set the stop switch to the start position.

CHOKE:

Set the choke control in the choke position and then back again to its original position (B)

In this way only the start throttle is applied with no choke.

AIR PURGE: Press the air purge diaphragm repeatedly until fuel begins to fill the diaphragm. The diaphragm need not be completely filled.

B

!WARNING!

The gearbox and clutch drum must be fitted before the machine is started, otherwise the clutch can become loose and cause personal injury.

Always move the hedge trimmer about 3 metres from the filling position before starting. Place the machine on a flat surface. Bear in mind that the blades start to move when the engine is started. Make sure the blades cannot come into contact with any object. Make sure that no unau- thorised persons are in the working area, otherwise there is a risk of serious personal injury.

Press the machine body against the ground using your left hand (NOTE! Do not use your foot). Grip the starter handle with your right hand and slowly pull the starter cord out until you feel some resistance, (the starter hooks grip) now quickly and powerfully pull the cord. Immediately press the choke control in when the engine fires and repeat until the engine starts. When the engine starts, quickly apply

Cold engine

IGNITION:

Set the stop switch to the start position.

CHOKE:

Set the choke control in the choke position (A).

full throttle and the start throttle will automatically disengage.

NOTE! Do not pull the starter cord out completely and do not release the starter cord from the fully extended position. This can damage the hedge trimmer.

The choke position is also the automatic start throttle position.

AIR PURGE: Press the air purge diaphragm repeatedly until fuel begins to fill the diaphragm. The diaphragm need not be completely filled.

Stop

The engine is stopped by switching the ignition off using the stop switch.

English – 13

Page 12 Page 14
Page 13
Image 13
Husqvarna 326HD60, 326HD75 manual Start and Stop, Control before starting, Start and stop
Page 12 Page 14

326HD60, 326HD75 specifications

The Husqvarna 326HD75 and 326HD60 are advanced hedge trimmers designed for professional landscapers and homeowners seeking high performance and reliability. Both models excel in providing exceptional cutting capabilities while ensuring user comfort and ease of operation, making them standout choices in the market.

The Husqvarna 326HD75 model is known for its impressive 75 cm cutting bar, which allows users to tackle larger hedges and shrubs with ease. Its powerful 25.4 cc X-Torq engine ensures efficient fuel consumption while delivering strong cutting performance. The lightweight design of the trimmer, weighing just 5.3 kg, minimizes user fatigue, allowing for extended periods of use without discomfort.

On the other hand, the Husqvarna 326HD60 features a slightly shorter 60 cm cutting bar, which is ideal for maintaining smaller hedges and detailing work. This model also utilizes the X-Torq engine technology, providing a mix of power and fuel efficiency. With an ergonomic design, the 326HD60 ensures that operators can handle precision tasks effectively.

Both models are equipped with adjustable handles, allowing for better maneuverability and control during cutting tasks. This feature is vital when working in tight spaces or on uneven terrain. Moreover, the double-sided cutting blades provide increased productivity by allowing the user to cut from multiple angles without repositioning the tool. This results in a cleaner, more precise cut and a professional finish.

The Husqvarna 326HD75 and 326HD60 also incorporate a robust anti-vibration system that significantly reduces vibration levels, enhancing user comfort during extended use. This technology not only improves the overall experience for the operator but also contributes to increased accuracy and control when trimming.

Additionally, these trimmers are designed with a low noise engine, making them suitable for residential areas where noise restrictions may apply. The ease of maintenance, including the readily accessible air filter and easy-to-replace spark plug, ensures that both models provide longevity and reliability.

In summary, the Husqvarna 326HD75 and 326HD60 hedge trimmers offer a perfect blend of power, efficiency, and ergonomic design. With their advanced features and technologies, they are ideal choices for anyone looking to achieve exceptional results in their landscaping projects while maintaining user comfort and reducing fatigue. Whether for professional or home use, these trimmers deliver top-tier performance and utility.
Top Page Image Contents