Husqvarna 326RJX-Series manual Contents, Note the following before starting

CONTENTS

Contents
KEY TO SYMBOLS
Symbols	2
CONTENTS
Contents	3
Note the following before starting:	3
SAFETY INSTRUCTIONS
Personal protective equipment	4
Machine′s safety equipment	4
Checking, maintaining and servicing the machine′s
safety equipment	6
Cutting equipment	8
General safety precautions	9
General working instructions	10
Basic working techniques	10
WHAT IS WHAT?
What is what on the trimmer?	12
ASSEMBLY
Fitting the J-handle	13
Fitting blades and trimmer heads	13
Fitting a trimmer guard and Superauto II 1" trimmer
head	13
Fitting the blade guard/combination guard, grass blade
and grass cutter	14
Fitting other guards and cutting attachments	14
FUEL HANDLING
Fuel	15
Fuelling	16
STARTING AND STOPPING
Check before starting	17
Starting and stopping	17
MAINTENANCE
Carburettor	19
Muffler	20
Cooling system	21
Spark plug	21
Air filter	21
Bevel gear	22
Maintenance schedule	22
TECHNICAL DATA
Technical data	23
FEDERAL EMISSION CONTROL WARRANTY
STATEMENT
YOUR WARRANTY RIGHTS AND OBLIGATIONS	24

Note the following before starting:

Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.

Long-term exposure to noise can result in permanent hearing impairment. So always use approved hearing protection.

Maintenance, replacement, or repair of the emission control devices and system may be performed by any nonroad engine repair establishment or individual.

WARNING! Under no circumstances may the

!design of the machine be modified without the permission of the manufacturer. Always use genuine accessories. Non-authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others.

Your warranty may not cover damage or liability caused by the use of non-authorized accessories or replacement parts.

WARNING! A clearing saw, brushcutter or

!trimmer can be dangerous if used incorrectly or carelessly, and can cause serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of this operator’s manual.

The Emissions Compliance Period referred to on the Emission Compliance label indicates the number of operating hours for which the engine has been shown to meet Federal emissions requirements. Category C = 50 hours, B = 125 hours, and A = 300 hours.

For customer assistance call: 704-921-7000 or contact us at

our website: www.husqvarna.com

English – 3