Manuals / Husqvarna / Lawn and Garden / Brush Cutter

Husqvarna 326RJX-Series manual Assembly, Fitting the J-handle, Fitting blades and trimmer heads

Models: 326RJX-Series

1 36
Download 36 pages 46.73 Kb
Page 13
Image 13

ASSEMBLY

Fitting the J-handle

•Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaft.

•Slide the spacer into the slot in the loop handle.

•Fit the nut, knob and screw. Do not overtighten.

•Attach the J-handle to the loop handle using the three screws, as shown.

•Now adjust the trimmer to give a comfortable working position. Tighten the bolt/knob.

WARNING! Only grass blades/grass cutters

!or trimmer heads/plastic blades may be used when the J-handle is fitted. Saw blades must never be used with the J-handle.

Fitting blades and trimmer heads

When fitting the cutting attachment it is extremely important that the raised section on the drive disc/support flange engages correctly in the centre hole of the cutting attachment. If the cutting attachment is fitted incorrectly it can result in serious and/or fatal personal injury.

WARNING! Never use a cutting attachment

!without an approved guard. See the chapter on Technical data. If an incorrect or faulty guard is fitted this can cause serious personal injury.

Fitting a trimmer guard and Superauto II 1" trimmer head

 

 

K

K

G

 

F

B

 

I

J

I

C

 

 

 

 

A

•Fit the correct trimmer guard (A) for use with the trimmer head. Hook the guard onto the fitting on the shaft and secure it with the bolt (L).

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•To fit the trimmer head, first separate the two halves (see diagram). Proceed as follows:

•Insert a finger into the centre hole of the cover (I) while grasping the cover with your other fingers. Using the index finger and thumb of your other hand, release the two catches (J) that engage in the cut-outs in the bottom half

(K). Pull apart the trimmer head, grasping the cover firmly.

•Place the cover (I) and the support flange (F) on the output shaft.

•Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit. Hold the shaft of the spanner as close to the blade guard as possible. To tighten the nut, turn the spanner in the opposite direction to the direction of rotation (Caution! left-hand thread).

•Fit the bottom half of the trimmer head (K) to the cover (I) by pressing them together, with the cut-outs on the bottom half aligned with the catches on the cover.

•To dismantle, follow the instructions in the reverse order.

English – 13

Page 12 Page 14
Page 13
Image 13
Husqvarna 326RJX-Series manual Assembly, Fitting the J-handle, Fitting blades and trimmer heads
Page 12 Page 14

326RJX-Series specifications

The Husqvarna 326RJX-Series is a versatile and robust line of trimmers designed for both professional landscapers and avid gardeners. Known for their durability and superior performance, these trimmers excel in various applications, from maintaining residential yards to handling large commercial landscaping tasks.

One of the standout features of the 326RJX-Series is its powerful yet efficient engine. Equipped with Husqvarna's X-Torq technology, these trimmers deliver high power output while significantly reducing fuel consumption and emissions. This makes them an environmentally friendly choice without sacrificing performance. The engines are designed to start easily, ensuring that users can quickly get to work without frustration.

The lightweight design of the 326RJX-Series enhances maneuverability, allowing operators to work for extended periods without excessive fatigue. This is particularly beneficial for professional users who require reliability and efficiency throughout their day. Additionally, the adjustable handle makes it easy to customize the ergonomics, providing users with a comfortable grip and control during operation.

Another notable characteristic of the 326RJX-Series is its range of cutting attachments. The trimmers are compatible with a variety of cutting heads, including nylon line and metal blades, making them suitable for tackling different types of vegetation. With a quick-release mechanism, users can effortlessly switch between attachments, enhancing versatility and efficiency in the field.

Husqvarna also places emphasis on safety and ease of use. The 326RJX-Series is equipped with features such as an effective air filter system that enhances engine longevity by protecting it from dust and debris. Furthermore, the trimmers come with a dual-line head that enables users to achieve a cleaner finish while minimizing the time spent on maintenance.

The built-in vibration dampening system reduces fatigue by minimizing vibration transfer to the user's hands, making prolonged use much more comfortable. This system exemplifies Husqvarna's commitment to user-friendly design and promotes a safer working environment.

In summary, the Husqvarna 326RJX-Series trimmers combine powerful performance with cutting-edge technologies, ensuring efficient and effective operation for a variety of tasks. With features designed for comfort, safety, and versatility, these trimmers stand out as a top choice for professionals and home enthusiasts alike. Whether tackling tough overgrowth or precision trimming, the 326RJX-Series consistently delivers exceptional results.