26 – English
TECHNICAL DATA

Technical data

Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/
EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under
various working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved
cutting attachments for the machine. The table indicates the lowest and highest values.
327RJx
Engine
Cylinder displacement, cm325,4
Cylinder bore, mm 34
Stroke, mm 27
Idle speed, rpm 2700
Recommended max. fast idle speed, rpm 11000-11700
Speed of output shaft, rpm 9300
Max. engine output, acc. to ISO 8893 0,9/8400
Catalytic converter muffler Yes
Speed-regulated ignition system Yes
Ignition system
Manufacturer/type of ignition system Walbro MB
Spark plug Champion RCJ 7Y
Electrode gap, mm 0,5
Fuel and lubrication system
Manufacturer/type of carburettor Zama C1Q
Fuel tank capacity, litre 0,5
Weight
Weight without fuel, cutting attachment and guard, kg 4,9
Noise emissions
(see note 1)
Sound power level, measured dB(A) 109
Sound power level, guaranteed LWA dB(A) 110
Noise levels
(see note 2)
Equivalent noise pressure level at the operator's ear,
measured according to EN ISO 22868, dB(A), min./max.: 93/98
Vibration levels
Vibration levels at handles, measured according to
EN ISO 22867, m/s2
At idle, left/right handles, min.: 3,0/1,6
At idle, left/right handles, max.: 3,4/1,7
At max. speed, left/right handles, min.: 3,4/2,8
At max. speed, left/right handles, max.: 9,2/6,1