Fitting other guards and cutting attachments | Husqvarna 327RJx

ASSEMBLY

CAUTION! Use the recommended blade guard. See the Technical data section.

G

F

E

D

A	B

C

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•Place the blade (D), support cup (E) and support ﬂange (F) on the output shaft.

•Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit. Hold the shaft of the spanner as close to the blade guard as possible. To tighten the nut, turn the spanner in the opposite direction to the direction of rotation (Caution! left-hand thread).

Fitting other guards and cutting attachments

•Fit the correct trimmer guard (A) for use with the trimmer head. Hook the trimmer guard/combination guard onto the ﬁtting on the shaft and secure with the bolt (L).

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•Screw on the trimmer head/plastic blades (H) in the opposite direction to the direction of rotation.

H

H

•To dismantle, follow the instructions in the reverse order.

English – 13

Image 13

Husqvarna 327RJx manual Fitting other guards and cutting attachments

Contents

327RJX-series Symbols KEY to SymbolsOperator of the machine must Ensure, while working, that no Persons or animals come closer Contents Dear customer Introduction What is what on the trimmer? What is WHAT? Personal protective equipment General Safety Precautions Throttle lockout Machine′s safety equipment Cutting attachment guard Stop switchVibration damping system Mufﬂer Locking nut Cutting equipment Cutting equipmentSharpening grass cutters and grass blades General rules Trimmer head Fitting the J-handle AssemblyAssembling the cutting equipment Fitting other guards and cutting attachments Fuel Handling Fuel safetyFuel Mixing Fueling Check before starting Starting and StoppingStarting and stopping Starting Starter cord around your hand Stopping Working Techniques Basic safety rulesGeneral working instructions Basic working techniques Grass clearing using a grass bladeGrass trimming with a trimmer head Trimming Sweeping Cutting Carburetor Maintenance Correctly adjusted carburetor Fine adjustment of the idle speed TLow speed jet L High speed jet H Cooling system MufﬂerSpark plug Screen is damaged it should be replaced Air ﬁlter Cleaning the air ﬁlterBevel gear Oiling the air ﬁlter Maintenance Daily Weekly Monthly Maintenance schedule Technical data Technical Data Your Warranty Rights and Obligations Emission Warranty Parts List Page S35 2,7mm 095-.106 25 m 15 cm T35, T35x T25 Page Page 1150990-95